Re: Surface 3 HID parsing errors
[][][][][][]
Subject: Re: Surface 3 HID parsing errors
From: Srinivas Pandruvada &&
Date: Wed, 18 Nov :35 -0800
In-reply-to: &.24088.65.&
References: &.24088.65.&
at 14:02 +0100, Bastien Nocera wrote:
& In kernel 4.4, the I2C hid layer throws errors when trying to parse the
& report descriptor for the HID sensor hub:
Was it working in 4.3? I gave a test with another device with i2c hid
and 4.4.rc1 that is working. If it was working in 4.3 it will be easy to
find the commit.
& i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:63 / ret_size:3
& I've attached the i2c-hid debug output through dmesg, and the report
& descriptor in this mail. Any ideas?
0.000000] Initializing cgroup subsys cpuset
0.000000] Initializing cgroup subsys cpu
0.000000] Initializing cgroup subsys cpuacct
0.000000] Linux version 4.4.0-0.rc0.git7.3.fc24.x86_64 (hadess@coal) (gcc version 5.1.1
(Red Hat 5.1.1-4) (GCC) ) #1 SMP Thu Nov 12 17:51:35 CET 2015
0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.4.0-0.rc0.git7.3.fc24.x86_64 root=UUID=6dadcd59--8cd2-fdd2c043b52e ro nomodeset rhgb quiet LANG=en_GB.UTF-8 i2c_hid.debug=1
0.000000] x86/fpu: Legacy x87 FPU detected.
0.000000] x86/fpu: Using 'lazy' FPU context switches.
0.000000] e820: BIOS-provided physical RAM map:
0.000000] BIOS-e820: [mem 0xefff] usable
0.000000] BIOS-e820: [mem 0xf000-0xffff] ACPI NVS
0.000000] BIOS-e820: [mem 0xdfff] usable
0.000000] BIOS-e820: [mem 0xe000-0xffff] reserved
0.000000] BIOS-e820: [mem 0x000001fffffff] usable
0.000000] BIOS-e820: [mem 0xfffff] reserved
0.000000] BIOS-e820: [mem 0x00000ba96efff] usable
0.000000] BIOS-e820: [mem 0xf000-0xbac6efff] reserved
0.000000] BIOS-e820: [mem 0xbac6f000-0xbad6efff] ACPI data
0.000000] BIOS-e820: [mem 0xbad6f000-0xbffff] ACPI NVS
0.000000] BIOS-e820: [mem 0xc00000bbaccfff] reserved
0.000000] BIOS-e820: [mem 0xbbacd000-0xbbad0fff] usable
0.000000] BIOS-e820: [mem 0xbbad00000bbad1fff] reserved
0.000000] BIOS-e820: [mem 0xbbad00000bbffffff] usable
0.000000] BIOS-e820: [mem 0x00000e3ffffff] reserved
0.000000] BIOS-e820: [mem 0xfea00000feafffff] reserved
0.000000] BIOS-e820: [mem 0xfec00000fec00fff] reserved
0.000000] BIOS-e820: [mem 0xfed00000fed01fff] reserved
0.000000] BIOS-e820: [mem 0xfed00000fed03fff] reserved
0.000000] BIOS-e820: [mem 0xfed00000fed06fff] reserved
0.000000] BIOS-e820: [mem 0xfed00000fed09fff] reserved
0.000000] BIOS-e820: [mem 0xfed1c000-0xfed1cfff] reserved
0.000000] BIOS-e820: [mem 0xfed00000fedbffff] reserved
0.000000] BIOS-e820: [mem 0xfee00000fee00fff] reserved
0.000000] BIOS-e820: [mem 0xffc00000ffffffff] reserved
0.000000] BIOS-e820: [mem 0x000013fffffff] usable
0.000000] NX (Execute Disable) protection: active
0.000000] efi: EFI v2.40 by American Megatrends
0.000000] efi:
ESRT=0xbb7cac98
ACPI=0xbad5d000
ACPI 2.0=0xbad5d000
SMBIOS=0xbb5fbd18
0.000000] esrt: Reserving ESRT space from 0xcac98 to 0xcad20.
0.000000] SMBIOS 2.8 present.
0.000000] DMI: Microsoft Corporation Surface 3/Surface 3, BIOS 1./10/2015
0.000000] e820: update [mem 0xx00000fff] usable ==& reserved
0.000000] e820: remove [mem 0x000afffff] usable
0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x
0.000000] MTRR default type: uncachable
0.000000] MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-FFFFF write-protect
0.000000] MTRR variable ranges enabled:
mask F write-back
mask FC0000000 write-back
2 base 0BE000000 mask FFE000000 uncachable
3 base 0BD000000 mask FFF000000 uncachable
4 base 0BD000000 mask FFF000000 uncachable
5 base 0BCC00000 mask FFFC00000 uncachable
6 base 0BCA00000 mask FFFE00000 uncachable
mask FC0000000 write-back
0.000000] x86/PAT: Configuration [0-7]: WB
0.000000] e820: update [mem 0xbca00000-0xffffffff] usable ==& reserved
0.000000] e820: last_pfn = 0xbc000 max_arch_pfn = 0x
0.000000] Base memory trampoline at [ffff] 98000 size 24576
0.000000] BRK [0xx0204efff] PGTABLE
0.000000] BRK [0xx0204ffff] PGTABLE
0.000000] BRK [0xx02050fff] PGTABLE
0.000000] BRK [0xx02051fff] PGTABLE
0.000000] BRK [0xx02052fff] PGTABLE
0.000000] BRK [0xx02053fff] PGTABLE
0.000000] RAMDISK: [mem 0x3ef3c000-0x3fffafff]
0.000000] ACPI: Early table checksum verification disabled
0.000000] ACPI: RSDP 0xBAD5D000 000024 (v02 ALASKA)
0.000000] ACPI: XSDT 0xBAD5D0B0 0000DC (v01 ALASKA A M I
0.000000] ACPI: FACP 0xBAD6A268 00010C (v05 ALASKA A M I
0.000000] ACPI: DSDT 0xBAD5D218 00D04B (v02 ALASKA A M I
0.000000] ACPI: APIC 0xBAD6A378 000084 (v03 ALASKA A M I
0.000000] ACPI: FPDT 0xBAD6A400 000044 (v01 ALASKA A M I
0.000000] ACPI: FIDT 0xBAD6A448 00009C (v01 ALASKA A M I
0.000000] ACPI: TCPA 0xBAD6A4E8 000032 (v02
0.000000] ACPI: MSDM 0xBAD6A520 000055 (v03 ALASKA A M I
0.000000] ACPI: MCFG 0xBAD6A578 00003C (v01 ALASKA A M I
0.000000] ACPI: WDSA 0xBAD6A5B8 00016F (v02 MSHWDS ACTABL
0.000000] ACPI: UEFI 0xBAD6A728 000042 (v01 ALASKA A M I
0.000000] ACPI: HPET 0xBAD6A770 000038 (v01 ALASKA A M I
0.000000] ACPI: SSDT 0xBAD6A7A8 000763 (v01 PmRef
0.000000] ACPI: SSDT 0xBAD6AF10 000290 (v01 PmRef
0.000000] ACPI: SSDT 0xBAD6B1A0 00017A (v01 PmRef
0.000000] ACPI: SSDT 0xBAD6B320 000427 (v01 Intel_ Tpm2Tabl
0.000000] ACPI: TPM2 0xBAD6B748 000034 (v03
0.000000] ACPI: LPIT 0xBAD6B780 000104 (v01 ALASKA A M I
MSFT 0100000D)
0.000000] ACPI: OEM0 0xBAD6B888 000084 (v05 INTEL
0.000000] ACPI: BGRT 0xBAD6B910 000038 (v01 ALASKA A M I
0.000000] ACPI: CSRT 0xBAD6B948 00014C (v00 INTEL
MSFT 0100000D)
0.000000] ACPI: SSDT 0xBAD6BA98 001F68 (v01 DptfTb DptfTab
0.000000] ACPI: SSDT 0xBAD6DA00 000104 (v01 SoCDpf SoCDptf
0.000000] ACPI: SSDT 0xBAD6DB08 0005C7 (v01 CpuDpf CpuDptf
0.000000] ACPI: SSDT 0xBAD6E0D0 000058 (v01 LowPM
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] No NUMA configuration found
0.000000] Faking a node at [mem 0x000013fffffff]
0.000000] NODE_DATA(0) allocated [mem 0x13fdfd82fff]
0.000000] Zone ranges:
[mem 0x0000000ffffff]
[mem 0x00000ffffffff]
[mem 0x000013fffffff]
0.000000] Movable zone start for each node
0.000000] Early memory node ranges
0: [mem 0xefff]
0: [mem 0xdfff]
0: [mem 0x000001fffffff]
0: [mem 0x00000ba96efff]
0: [mem 0xbbacd000-0xbbad0fff]
0: [mem 0xbbad00000bbffffff]
0: [mem 0x000013fffffff]
0.000000] Initmem setup node 0 [mem 0x000013fffffff]
0.000000] On node 0 totalpages: 1027133
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 11891 pages used for memmap
DMA32 zone: 760993 pages, LIFO batch:31
Normal zone: 4096 pages used for memmap
Normal zone: 262144 pages, LIFO batch:31
0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED
0.000000] Reserving Intel graphics stolen memory at 0xbce00000-0xbedfffff
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
0.000000] Using ACPI (MADT) for SMP configuration information
0.000000] ACPI: HPET id: 0x base: 0xfed00000
0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
0.000000] PM: Registered nosave memory: [mem 0xx00000fff]
0.000000] PM: Registered nosave memory: [mem 0xx0008ffff]
0.000000] PM: Registered nosave memory: [mem 0xx0009ffff]
0.000000] PM: Registered nosave memory: [mem 0x000afffff]
0.000000] PM: Registered nosave memory: [mem 0xx201fffff]
0.000000] PM: Registered nosave memory: [mem 0xba96f000-0xbac6efff]
0.000000] PM: Registered nosave memory: [mem 0xbac6f000-0xbad6efff]
0.000000] PM: Registered nosave memory: [mem 0xbad6f000-0xbb3bffff]
0.000000] PM: Registered nosave memory: [mem 0xbb3c0000-0xbbaccfff]
0.000000] PM: Registered nosave memory: [mem 0xbbad1000-0xbbad1fff]
0.000000] PM: Registered nosave memory: [mem 0xbcxbcdfffff]
0.000000] PM: Registered nosave memory: [mem 0xbce00000-0xbedfffff]
0.000000] PM: Registered nosave memory: [mem 0xbee00000-0xdfffffff]
0.000000] PM: Registered nosave memory: [mem 0xexe3ffffff]
0.000000] PM: Registered nosave memory: [mem 0xexfe9fffff]
0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfeafffff]
0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff]
0.000000] PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff]
0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed05fff]
0.000000] PM: Registered nosave memory: [mem 0xfed06000-0xfed06fff]
0.000000] PM: Registered nosave memory: [mem 0xfed07000-0xfed07fff]
0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed09fff]
0.000000] PM: Registered nosave memory: [mem 0xfed0a000-0xfed1bfff]
0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
0.000000] PM: Registered nosave memory: [mem 0xfed1d000-0xfed7ffff]
0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfedbffff]
0.000000] PM: Registered nosave memory: [mem 0xfedc0000-0xfedfffff]
0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
0.000000] e820: [mem 0xbee00000-0xdfffffff] available for PCI devices
0.000000] Booting paravirtualized kernel on bare hardware
0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1419 ns
0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
0.000000] PERCPU: Embedded 34 pages/cpu @ffff s9 d3
0.000000] pcpu-alloc: s9 d3 alloc=1*2097152
0.000000] pcpu-alloc: [0] 0 1 2 3
0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 1011061
0.000000] Policy zone: Normal
0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.0-0.rc0.git7.3.fc24.x86_64 root=UUID=6dadcd59--8cd2-fdd2c043b52e ro nomodeset rhgb quiet LANG=en_GB.UTF-8 i2c_hid.debug=1
0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
0.000000] Memory: 08532K available (7766K kernel code, 1293K rwdata, 3424K rodata, 1528K init, 1544K bss, 198784K reserved, 0K cma-reserved)
0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
0.000000] Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=4.
0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
0.000000] NR_IRQS:65792 nr_irqs:1024 0
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
0.000000] Console: colour dummy device 80x25
0.000000] console [tty0] enabled
0.000000] tsc: Using PIT calibration value
0.000000] tsc: Detected
MHz processor
0.000062] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.68 BogoMIPS (lpj=1599842)
0.000069] pid_max: default: 32768 minimum: 301
0.000088] ACPI: Core revision
0.032405] ACPI: 9 ACPI AML tables successfully acquired and loaded
0.034044] Security Framework initialized
0.034052] Yama: becoming mindful.
0.034064] SELinux:
Initializing.
0.034090] SELinux:
Starting in permissive mode
0.034888] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
0.037265] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
0.038309] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
0.038336] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
0.038877] Initializing cgroup subsys io
0.038889] Initializing cgroup subsys memory
0.038908] Initializing cgroup subsys devices
0.038917] Initializing cgroup subsys freezer
0.038924] Initializing cgroup subsys net_cls
0.038931] Initializing cgroup subsys perf_event
0.038939] Initializing cgroup subsys net_prio
0.038947] Initializing cgroup subsys hugetlb
0.038961] Initializing cgroup subsys pids
0.039016] CPU: Physical Processor ID: 0
0.039021] CPU: Processor Core ID: 0
0.039030] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
0.039034] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
0.044447] mce: CPU supports 6 MCE banks
0.044465] CPU0: Thermal monitoring enabled (TM1)
0.044475] process: using mwait in idle threads
0.044482] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
0.044485] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
0.044991] Freeing SMP alternatives memory: 28K (ffffffff81ec3000 - ffffffff81eca000)
0.053986] ftrace: allocating 29314 entries in 115 pages
0.075556] TSC deadline timer enabled
0.075566] smpboot: CPU0: Intel(R) Atom(TM) x7-Z8700
CPU @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x3)
0.075621] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
0.075646] ... version:
0.075650] ... bit width:
0.075652] ... generic registers:
0.075655] ... value mask:
000000ffffffffff
0.075658] ... max period:
000000ffffffffff
0.075660] ... fixed-purpose events:
0.075663] ... event mask:
0.077852] x86: Booting SMP configuration:
0.077859] .... node
0.096652] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
0.134526] x86: Booted up 1 node, 4 CPUs
0.134533] smpboot: Total of 4 processors activated (12798.73 BogoMIPS)
0.135920] devtmpfs: initialized
0.144664] PM: Registering ACPI NVS region [mem 0xx0008ffff] (4096 bytes)
0.144671] PM: Registering ACPI NVS region [mem 0xbad6f000-0xbb3bffff] (6623232 bytes)
0.145173] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5000 ns
0.145446] atomic64_test: passed for x86-64 platform with CX8 and with SSE
0.145454] pinctrl core: initialized pinctrl subsystem
0.145579] RTC time: 11:58:14, date: 11/18/15
0.145996] NET: Registered protocol family 16
0.148387] cpuidle: using governor menu
0.148642] ACPI: bus type PCI registered
0.148648] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
0.148876] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xexefffffff] (base 0xe0000000)
0.148884] PCI: MMCONFIG at [mem 0xexefffffff] reserved in E820
0.148892] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xexe3ffffff] (base 0xe0000000) (size reduced!)
0.148918] PCI: Using configuration type 1 for base access
0.155555] ACPI: Added _OSI(Module Device)
0.155561] ACPI: Added _OSI(Processor Device)
0.155564] ACPI: Added _OSI(3.0 _SCP Extensions)
0.155567] ACPI: Added _OSI(Processor Aggregator Device)
0.160611] ACPI : EC: Look up EC in DSDT
0.173213] ACPI Error: Needed [Integer/String/Buffer], found [Device] ffffe10 (/exresop-424)
0.173230] ACPI Exception: AE_AML_OPERAND_TYPE, Could not execute arguments for [KEYS] (Region) (/nsinit-355)
0.177104] \_SB_ _OSC UUID A27-44F9-8D60-3CBBC22E7B48
6E B0 11 08 27 4A F9 44 8D 60 3C BB C2 2E 7B 48
0.177897] ACPI: Dynamic OEM Table Load:
0.177919] ACPI: SSDT 0xFFFF00 00066D (v01 PmRef
0.179479] ACPI: Dynamic OEM Table Load:
0.179492] ACPI: SSDT 0xFFFF00 0003A5 (v01 PmRef
0.181526] ACPI: Dynamic OEM Table Load:
0.181538] ACPI: SSDT 0xFFFFDE00 00015F (v01 PmRef
0.183049] ACPI: Dynamic OEM Table Load:
0.183060] ACPI: SSDT 0xFFFFF3C0 00008D (v01 PmRef
0.186385] ACPI: Interpreter enabled
0.186406] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (/hwxface-580)
0.186421] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (/hwxface-580)
0.186430] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (/hwxface-580)
0.186442] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (/hwxface-580)
0.186461] ACPI: (supports S0 S5)
0.186469] ACPI: Using IOAPIC for interrupt routing
0.186559] PCI: Using host bridge windows from ACPI; if necessary, use &pci=nocrs& and report a bug
0.189570] ACPI: Power Resource [ID3C] (on)
0.191416] ACPI: Power Resource [PRWF] (on)
0.193179] ACPI: Power Resource [USBC] (on)
0.194361] ACPI: Power Resource [WWPR] (off)
0.201365] ACPI Error: No handler for Region [GPOR] (ffffe8) [GeneralPurposeIo] (/evregion-163)
0.201377] ACPI Error: Region GeneralPurposeIo (ID=8) has no handler (/exfldio-297)
0.201387] ACPI Error: Method parse/execution failed [\_SB.PCI0.SPI1.NTRG._STA] (Node ffffa0), AE_NOT_EXIST (/psparse-542)
0.201443] ACPI Error: No handler for Region [GPOR] (ffffe8) [GeneralPurposeIo] (/evregion-163)
0.201451] ACPI Error: Region GeneralPurposeIo (ID=8) has no handler (/exfldio-297)
0.201458] ACPI Error: Method parse/execution failed [\_SB.PCI0.SPI1.NTRG._STA] (Node ffffa0), AE_NOT_EXIST (/psparse-542)
0.201472] ACPI Error: Method execution failed [\_SB.PCI0.SPI1.NTRG._STA] (Node ffffa0), AE_NOT_EXIST (/uteval-103)
0.203593] ACPI: Power Resource [CLK3] (on)
0.210425] ACPI: Power Resource [CLK0] (on)
0.210537] ACPI: Power Resource [CLK1] (on)
0.210779] ACPI: Power Resource [P28X] (off)
0.210883] ACPI: Power Resource [P18X] (off)
0.212235] ACPI Error: No handler for Region [SNOP] (ffff8) [GenericSerialBus] (/evregion-163)
0.212246] ACPI Error: Region GenericSerialBus (ID=9) has no handler (/exfldio-297)
0.212256] ACPI Error: Method parse/execution failed [\_SB.PCI0.I2C4.SAM._SUB] (Node ffffe88), AE_NOT_EXIST (/psparse-542)
0.212271] ACPI Error: Method execution failed [\_SB.PCI0.I2C4.SAM._SUB] (Node ffffe88), AE_NOT_EXIST (/uteval-103)
0.213328] ACPI: Power Resource [TCPR] (off)
0.228087] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
0.228106] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
0.228114] \_SB_.PCI0 _OSC UUID 33DB4D5B-1FF7-401C-DD766
5B 4D DB 33 F7 1F 1C 40 96 57 74 41 C0 3D D7 66
0.228308] \_SB_.PCI0 _OSC UUID 33DB4D5B-1FF7-401C-DD766
5B 4D DB 33 F7 1F 1C 40 96 57 74 41 C0 3D D7 66
0.228499] \_SB_.PCI0 _OSC UUID 33DB4D5B-1FF7-401C-DD766
5B 4D DB 33 F7 1F 1C 40 96 57 74 41 C0 3D D7 66
0.228690] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
0.228729] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
0.229989] PCI host bridge to bus 0000:00
0.229998] pci_bus 0000:00: root bus resource [io
0.230005] pci_bus 0000:00: root bus resource [io
0xf window]
0.230010] pci_bus 0000:00: root bus resource [io
0xcf7 window]
0.230014] pci_bus 0000:00: root bus resource [io
0x0d00-0xffff window]
0.230021] pci_bus 0000:00: root bus resource [mem 0x000abffff window]
0.230025] pci_bus 0000:00: root bus resource [mem 0x000cdffff window]
0.230030] pci_bus 0000:00: root bus resource [mem 0x000efffff window]
0.230035] pci_bus 0000:00: root bus resource [mem 0xx201fffff window]
0.230040] pci_bus 0000:00: root bus resource [mem 0xbce00001-0xbee00000 window]
0.230044] pci_bus 0000:00: root bus resource [mem 0xcxdfffffff window]
0.230050] pci_bus 0000:00: root bus resource [bus 00-ff]
0.230069] pci .0: [] type 00 class 0x060000
0.230606] pci .0: [] type 00 class 0x030000
0.230648] pci .0: reg 0x10: [mem 0xdxd0ffffff 64bit]
0.230665] pci .0: reg 0x18: [mem 0xcxcfffffff 64bit pref]
0.230677] pci .0: reg 0x20: [io
0xf000-0xf03f]
0.230996] pci .0: [] type 00 class 0x048000
0.231025] pci .0: reg 0x10: [mem 0xdxd13fffff]
0.231366] pci b.0: [8086:22dc] type 00 class 0x118000
0.231402] pci b.0: reg 0x10: [mem 0xd1aa37fff 64bit]
0.231773] pci .0: [] type 00 class 0x0c0330
0.231820] pci .0: reg 0x10: [mem 0xd1aa0ffff 64bit]
0.231912] pci .0: PME# supported from D3hot D3cold
0.232271] pci a.0: [] type 00 class 0x108000
0.232312] pci a.0: reg 0x10: [mem 0xdxd17fffff]
0.232327] pci a.0: reg 0x14: [mem 0xdxd16fffff]
0.232418] pci a.0: PME# supported from D0 D3hot
0.232857] pci c.0: [] type 01 class 0x060400
0.234442] pci c.0: PME# supported from D0 D3hot D3cold
0.235027] pci f.0: [c] type 00 class 0x060100
0.236288] pci .0: [11ab:2b38] type 00 class 0x020000
0.236363] pci .0: reg 0x10: [mem 0xdxd19fffff 64bit pref]
0.236398] pci .0: reg 0x18: [mem 0xdxd18fffff 64bit pref]
0.236649] pci .0: supports D1 D2
0.236654] pci .0: PME# supported from D0 D1 D3hot D3cold
0.236795] pci .0: System wakeup disabled by ACPI
0.239368] pci c.0: PCI bridge to [bus 01]
0.239381] pci c.0:
bridge window [mem 0xdxd19fffff]
0.243454] ACPI Error: No handler for Region [GPOR] (ffffe8) [GeneralPurposeIo] (/evregion-163)
0.243464] ACPI Error: Region GeneralPurposeIo (ID=8) has no handler (/exfldio-297)
0.243476] ACPI Error: Method parse/execution failed [\_SB.PCI0.SPI1.NTRG._STA] (Node ffffa0), AE_NOT_EXIST (/psparse-542)
0.248117] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
0.248310] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
0.248482] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
0.248652] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
0.248815] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
0.248984] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
0.249149] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
0.249354] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
0.256828] vgaarb: setting as boot device: PCI:.0
0.256837] vgaarb: device added: PCI:.0,decodes=io+mem,owns=io+mem,locks=none
0.256844] vgaarb: loaded
0.256850] vgaarb: bridge control possible .0
0.257148] SCSI subsystem initialized
0.257277] libata version 3.00 loaded.
0.257381] ACPI: bus type USB registered
0.257440] usbcore: registered new interface driver usbfs
0.257463] usbcore: registered new interface driver hub
0.257520] usbcore: registered new device driver usb
0.258049] PCI: Using ACPI for IRQ routing
0.260789] PCI: pci_cache_line_size set to 64 bytes
0.260974] Expanded resource reserved due to conflict with PCI Bus 0000:00
0.260982] e820: reserve RAM buffer [mem 0xx0008ffff]
0.260987] e820: reserve RAM buffer [mem 0xx0009ffff]
0.260991] e820: reserve RAM buffer [mem 0xba96f000-0xbbffffff]
0.260994] e820: reserve RAM buffer [mem 0xbbad1000-0xbbffffff]
0.261336] NetLabel: Initializing
0.261342] NetLabel:
domain hash size = 128
0.261344] NetLabel:
protocols = UNLABELED CIPSOv4
0.261385] NetLabel:
unlabeled traffic allowed by default
0.261591] clocksource: Switched to clocksource refined-jiffies
0.286665] pnp: PnP ACPI init
0.287070] system 00:00: [io
0xf] has been reserved
0.287077] system 00:00: [io
0xf] has been reserved
0.287082] system 00:00: [io
0xfe] has been reserved
0.287094] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
0.287342] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
0.291285] system 00:02: [mem 0xd1aa35fff] has been reserved
0.291293] system 00:02: [mem 0xd1aa33fff] has been reserved
0.291299] system 00:02: [mem 0xd1aa22fff] has been reserved
0.291304] system 00:02: [mem 0xd1aa20fff] has been reserved
0.291310] system 00:02: [mem 0xd1a1e000-0xd1a1efff] has been reserved
0.291315] system 00:02: [mem 0xd1a1c000-0xd1a1cfff] has been reserved
0.291320] system 00:02: [mem 0xd1a1a000-0xd1a1afff] has been reserved
0.291325] system 00:02: [mem 0xd1aa18fff] has been reserved
0.291330] system 00:02: [mem 0xd1aa31fff] has been reserved
0.291335] system 00:02: [mem 0xd1a2f000-0xd1a2ffff] has been reserved
0.291347] system 00:02: [mem 0xd1a2d000-0xd1a2dfff] has been reserved
0.291353] system 00:02: [mem 0xd1a2b000-0xd1a2bfff] has been reserved
0.291358] system 00:02: [mem 0xd1aa29fff] has been reserved
0.291363] system 00:02: [mem 0xd1aa27fff] has been reserved
0.291368] system 00:02: [mem 0xd1aa25fff] has been reserved
0.291373] system 00:02: [mem 0xd1aa23fff] has been reserved
0.291385] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
0.291508] system 00:03: [mem 0xexefffffff] could not be reserved
0.291514] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
0.291522] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
0.291527] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
0.291532] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
0.291537] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
0.291542] system 00:03: [mem 0xfed80000-0xfedbffff] could not be reserved
0.291548] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
0.291553] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
0.291561] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
0.291987] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
0.292851] pnp: PnP ACPI: found 5 devices
0.299404] pci c.0: bridge window [io
0xfff] to [bus 01] add_size 1000
0.299415] pci c.0: bridge window [mem 0xx000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
0.299430] pci c.0: res[15]=[mem 0xx000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
0.299436] pci c.0: res[15]=[mem 0xx002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
0.299441] pci c.0: res[13]=[io
0xfff] res_to_dev_res add_size 1000 min_align 1000
0.299446] pci c.0: res[13]=[io
0xfff] res_to_dev_res add_size 1000 min_align 1000
0.299473] pci c.0: BAR 15: assigned [mem 0xd1bcfffff 64bit pref]
0.299481] pci c.0: BAR 13: assigned [io
0.299492] pci c.0: PCI bridge to [bus 01]
0.299518] pci c.0:
bridge window [io
0.299588] pci c.0:
bridge window [mem 0xdxd19fffff]
0.299636] pci c.0:
bridge window [mem 0xd1bcfffff 64bit pref]
0.299727] pci_bus 0000:00: resource 4 [io
0.299733] pci_bus 0000:00: resource 5 [io
0xf window]
0.299737] pci_bus 0000:00: resource 6 [io
0xcf7 window]
0.299742] pci_bus 0000:00: resource 7 [io
0x0d00-0xffff window]
0.299746] pci_bus 0000:00: resource 8 [mem 0x000abffff window]
0.299751] pci_bus 0000:00: resource 9 [mem 0x000cdffff window]
0.299755] pci_bus 0000:00: resource 10 [mem 0x000efffff window]
0.299760] pci_bus 0000:00: resource 11 [mem 0xx201fffff window]
0.299765] pci_bus 0000:00: resource 12 [mem 0xbce00001-0xbee00000 window]
0.299769] pci_bus 0000:00: resource 13 [mem 0xcxdfffffff window]
0.299774] pci_bus 0000:01: resource 0 [io
0.299778] pci_bus 0000:01: resource 1 [mem 0xdxd19fffff]
0.299783] pci_bus 0000:01: resource 2 [mem 0xd1bcfffff 64bit pref]
0.299909] NET: Registered protocol family 2
0.300385] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
0.300584] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
0.300778] TCP: Hash tables configured (established 32768 bind 32768)
0.300889] UDP hash table entries: 2048 (order: 4, 65536 bytes)
0.300952] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
0.301159] NET: Registered protocol family 1
0.301203] pci .0: Video device with shadowed ROM
0.301437] PCI: CLS 64 bytes, default 64
0.301612] Unpacking initramfs...
0.944479] Freeing initrd memory: 17148K (ffff8 - ffff88003fffb000)
0.944503] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
0.944511] software IO TLB [mem 0xbxba000000] (64MB) mapped at [ffff-ffff8800b9ffffff]
0.946859] futex hash table entries: 1024 (order: 4, 65536 bytes)
0.946947] audit: initializing netlink subsys (disabled)
0.946995] audit: type=2000 audit(.827:1): initialized
0.947735] Initialise system trusted keyring
0.947961] HugeTLB registered 2 MB page size, pre-allocated 0 pages
0.952037] zbud: loaded
0.952573] VFS: Disk quotas dquot_6.6.0
0.952695] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
0.953873] Key type big_key registered
0.953884] SELinux:
Registering netfilter hooks
0.968077] NET: Registered protocol family 38
0.968107] Key type asymmetric registered
0.968117] Asymmetric key parser 'x509' registered
0.968297] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
0.968404] io scheduler noop registered
0.968414] io scheduler deadline registered
0.968524] io scheduler cfq registered (default)
0.970925] pcieport c.0: Signaling PME through PCIe PME interrupt
0.970934] pci .0: Signaling PME through PCIe PME interrupt
0.970983] pcie_pme c.0:pcie01: service driver pcie_pme loaded
0.971002] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
0.971097] pciehp c.0:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
0.971259] pciehp c.0:pcie04: service driver pciehp loaded
0.971277] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
0.971374] efifb: probing for efifb
0.971422] efifb: framebuffer at 0xc0000000, mapped to 0xffffc, using 1876k, total 1875k
0.971426] efifb: mode is 800x600x32, linelength=3200, pages=1
0.971428] efifb: scrolling: redraw
0.971432] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
0.971761] Console: switching to colour frame buffer device 100x37
0.975486] fb0: EFI VGA frame buffer device
0.975534] intel_idle: MWAIT substates: 0x
0.975538] intel_idle: v0.4 model 0x4C
0.975541] intel_idle: lapic_timer_reliable_states 0xffffffff
0.976263] ACPI: AC Adapter [ADP1] (off-line)
0.976468] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
0.976476] ACPI: Power Button [PWRB]
0.976577] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
0.976584] ACPI: Sleep Button [SLPB]
0.976700] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
0.976748] ACPI: Lid Switch [LID]
0.981348] GHES: HEST is not enabled!
0.981617] Serial:
driver, 32 ports, IRQ sharing enabled
1.:01: ttyS0 at I/O 0x3f8 (irq = 224, base_baud = 115200) is a 16550A
1.86228A:00: ttyS4 at MMIO 0xd1a21000 (irq = 4, base_baud = 2764800) is a 16550A
1.86228A:01: ttyS5 at MMIO 0xd1a1f000 (irq = 5, base_baud = 2764800) is a 16550A
1.007950] hpet: number irqs doesn't agree with number of timers
1.008075] Non-volatile memory driver v1.3
1.008172] Linux agpgart interface v0.103
1.009584] libphy: Fixed MDIO Bus: probed
1.009745] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
1.009760] ehci-pci: EHCI PCI platform driver
1.009799] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
1.009814] ohci-pci: OHCI PCI platform driver
1.009841] uhci_hcd: USB Universal Host Controller Interface driver
1.010223] xhci_hcd .0: xHCI Host Controller
1.010374] xhci_hcd .0: new USB bus registered, assigned bus number 1
1.010631] xhci_hcd .0: hcc params 0x hci version 0x100 quirks 0x
1.010649] xhci_hcd .0: cache line size of 64 is not supported
1.011036] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
1.011045] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.011050] usb usb1: Product: xHCI Host Controller
1.011054] usb usb1: Manufacturer: Linux 4.4.0-0.rc0.git7.3.fc24.x86_64 xhci-hcd
1.011058] usb usb1: SerialNumber: .0
1.011459] hub 1-0:1.0: USB hub found
1.011493] hub 1-0:1.0: 7 ports detected
1.012775] xhci_hcd .0: xHCI Host Controller
1.012917] xhci_hcd .0: new USB bus registered, assigned bus number 2
1.013027] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
1.013033] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.013037] usb usb2: Product: xHCI Host Controller
1.013041] usb usb2: Manufacturer: Linux 4.4.0-0.rc0.git7.3.fc24.x86_64 xhci-hcd
1.013045] usb usb2: SerialNumber: .0
1.013359] hub 2-0:1.0: USB hub found
1.013404] hub 2-0:1.0: 6 ports detected
1.013760] usb: failed to peer usb2-port2 and usb1-port1 by location (usb2-port2:none) (usb1-port1:usb2-port1)
1.013765] usb usb2-port2: failed to peer to usb1-port1 (-16)
1.013768] usb: port power management may be unreliable
1.013910] usb: failed to peer usb2-port3 and usb1-port1 by location (usb2-port3:none) (usb1-port1:usb2-port1)
1.013915] usb usb2-port3: failed to peer to usb1-port1 (-16)
1.014064] usb: failed to peer usb2-port4 and usb1-port1 by location (usb2-port4:none) (usb1-port1:usb2-port1)
1.014069] usb usb2-port4: failed to peer to usb1-port1 (-16)
1.014205] usb: failed to peer usb2-port5 and usb1-port1 by location (usb2-port5:none) (usb1-port1:usb2-port1)
1.014211] usb usb2-port5: failed to peer to usb1-port1 (-16)
1.014350] usb: failed to peer usb2-port6 and usb1-port1 by location (usb2-port6:none) (usb1-port1:usb2-port1)
1.014355] usb usb2-port6: failed to peer to usb1-port1 (-16)
1.014752] usbcore: registered new interface driver usbserial
1.014778] usbcore: registered new interface driver usbserial_generic
1.014800] usbserial: USB Serial support registered for generic
1.014885] i8042: PNP: No PS/2 controller found. Probing ports directly.
2.095995] i8042: No controller found
2.096269] mousedev: PS/2 mouse device common for all mice
2.096941] ACPI Warning: Could not enable fixed event - RealTimeClock (4) (/evxface-654)
2.097289] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
2.097360] rtc_cmos 00:04: alarms up to one day, 242 bytes nvram
2.097543] device-mapper: uevent: version 1.0.3
2.097771] device-mapper: ioctl: 4.34.0-ioctl () initialised: dm-devel@xxxxxxxxxx
2.097949] Intel P-state driver initializing.
2.099586] hidraw: raw HID events driver (C) Jiri Kosina
2.099976] usbcore: registered new interface driver usbhid
2.099990] usbhid: USB HID core driver
2.100680] drop_monitor: Initializing network drop monitor service
2.101200] ip_tables: (C)
Netfilter Core Team
2.101413] Initializing XFRM netlink socket
2.102692] NET: Registered protocol family 10
2.104220] mip6: Mobile IPv6
2.104257] NET: Registered protocol family 17
2.105908] SSE version of gcm_enc/dec engaged.
2.125039] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x170f8fa7afd, max_idle_ns:
2.140046] clocksource: Switched to clocksource tsc
2.170094] registered taskstats version 1
2.170134] Loading compiled-in X.509 certificates
2.172765] Loaded X.509 cert 'Fedora kernel signing key: 7f87fbbd4c585d5636155dac694cb'
2.172843] zswap: loaded using pool lzo/zbud
Magic number: 7:990:984
2.174471] rtc_cmos 00:04: setting system clock to
11:58:16 UTC ()
2.175119] PM: Hibernation image not present or could not be loaded.
2.179004] Freeing unused kernel memory: 1528K (ffffffff81d45000 - ffffffff81ec3000)
2.179012] Write protecting the kernel read-only data: 12288k
2.180231] Freeing unused kernel memory: 412K (ffff - ffff)
2.184021] Freeing unused kernel memory: 672K (ffff00 - ffff00)
2.184065] ------------[ cut here ]------------
2.184076] WARNING: CPU: 0 PID: 1 at arch/x86/mm/dump_pagetables.c:225 note_page+0x5e1/0x780()
2.184081] x86/mm: Found insecure W+X mapping at address ffff00/0xffff00
2.184084] Modules linked in:
2.184091] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-0.rc0.git7.3.fc24.x86_64 #1
2.184094] Hardware name: Microsoft Corporation Surface 3/Surface 3, BIOS 1./10/2015
06ef97ae6 ffffd48 ffffffff813aea8f
ffffd90 ffffd80 ffffffff810a1a22 ffffe90
2.184111] Call Trace:
[&ffffffff813aea8f&] dump_stack+0x44/0x55
[&ffffffff810a1a22&] warn_slowpath_common+0x82/0xc0
[&ffffffff810a1abc&] warn_slowpath_fmt+0x5c/0x80
[&ffffffff&] note_page+0x5e1/0x780
[&ffffffff8106fb5c&] ptdump_walk_pgd_level_core+0x30c/0x440
[&ffffffff8106fd37&] ptdump_walk_pgd_level_checkwx+0x17/0x20
[&ffffffff81065a64&] mark_rodata_ro+0xf4/0x100
[&ffffffff&] ? rest_init+0x80/0x80
[&ffffffff8178537d&] kernel_init+0x1d/0xe0
[&ffffffff8179134f&] ret_from_fork+0x3f/0x70
[&ffffffff&] ? rest_init+0x80/0x80
2.184170] ---[ end trace d93fa ]---
2.200571] x86/mm: Checked W+X mappings: FAILED, 56407 W+X pages found.
2.222095] random: systemd urandom read with 11 bits of entropy available
2.225608] systemd[1]: systemd 222 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
2.225972] systemd[1]: Detected architecture x86-64.
2.225979] systemd[1]: Running in initial RAM disk.
2.226027] systemd[1]: Set hostname to &surface&.
2.327387] systemd[1]: Created slice -.slice.
2.327414] systemd[1]: Starting -.slice.
2.327519] systemd[1]: Listening on Journal Socket.
2.327538] systemd[1]: Starting Journal Socket.
2.327608] systemd[1]: Listening on udev Control Socket.
2.327626] systemd[1]: Starting udev Control Socket.
2.327801] systemd[1]: Listening on Journal Audit Socket.
2.327819] systemd[1]: Starting Journal Audit Socket.
2.327966] systemd[1]: Created slice System Slice.
2.327985] systemd[1]: Starting System Slice.
2.328059] systemd[1]: Started dracut ask for additional cmdline parameters.
2.337638] systemd[1]: Starting Setup Virtual Console...
2.338093] systemd[1]: Started Load Kernel Modules.
2.339664] systemd[1]: Starting Create list of required static device nodes for the current kernel...
2.339714] systemd[1]: Reached target Swap.
2.339747] systemd[1]: Starting Swap.
2.339865] systemd[1]: Listening on Journal Socket (/dev/log).
2.339884] systemd[1]: Starting Journal Socket (/dev/log).
2.341105] systemd[1]: Starting Journal Service...
2.344032] systemd[1]: Starting dracut cmdline hook...
2.344154] systemd[1]: Listening on udev Kernel Socket.
2.344182] systemd[1]: Starting udev Kernel Socket.
2.344216] systemd[1]: Reached target Sockets.
2.344235] systemd[1]: Starting Sockets.
2.344271] systemd[1]: Reached target Slices.
2.344287] systemd[1]: Starting Slices.
2.344333] systemd[1]: Reached target Timers.
2.344349] systemd[1]: Starting Timers.
2.345681] systemd[1]: Starting Apply Kernel Variables...
2.345729] systemd[1]: Reached target Local File Systems.
2.345763] systemd[1]: Starting Local File Systems.
2.346977] systemd[1]: Started Create list of required static device nodes for the current kernel.
2.349886] audit: type=1130 audit(.674:2): pid=1 uid=0 auid= ses= subj=kernel msg='unit=kmod-static-nodes comm=&systemd& exe=&/usr/lib/systemd/systemd& hostname=? addr=? terminal=? res=success'
2.350622] systemd[1]: Started Apply Kernel Variables.
2.350705] audit: type=1130 audit(.675:3): pid=1 uid=0 auid= ses= subj=kernel msg='unit=systemd-sysctl comm=&systemd& exe=&/usr/lib/systemd/systemd& hostname=? addr=? terminal=? res=success'
2.358450] systemd[1]: Starting Create Static Device Nodes in /dev...
2.363937] usb 1-2: new high-speed USB device number 2 using xhci_hcd
2.367479] systemd[1]: Started Create Static Device Nodes in /dev.
2.367595] audit: type=1130 audit(.692:4): pid=1 uid=0 auid= ses= subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm=&systemd& exe=&/usr/lib/systemd/systemd& hostname=? addr=? terminal=? res=success'
2.385859] systemd[1]: Started Journal Service.
2.385980] audit: type=1130 audit(.710:5): pid=1 uid=0 auid= ses= subj=kernel msg='unit=systemd-journald comm=&systemd& exe=&/usr/lib/systemd/systemd& hostname=? addr=? terminal=? res=success'
2.495943] audit: type=1130 audit(.820:6): pid=1 uid=0 auid= ses= subj=kernel msg='unit=dracut-cmdline comm=&systemd& exe=&/usr/lib/systemd/systemd& hostname=? addr=? terminal=? res=success'
2.528152] usb 1-2: New USB device found, idVendor=0424, idProduct=2137
2.528159] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
2.528162] usb 1-2: Product: USB2137
2.528165] usb 1-2: Manufacturer: SMSC
2.528640] hub 1-2:1.0: USB hub found
2.528677] hub 1-2:1.0: 7 ports detected
2.547519] audit: type=1130 audit(.872:7): pid=1 uid=0 auid= ses= subj=kernel msg='unit=systemd-vconsole-setup comm=&systemd& exe=&/usr/lib/systemd/systemd& hostname=? addr=? terminal=? res=success'
2.554259] audit: type=1130 audit(.878:8): pid=1 uid=0 auid= ses= subj=kernel msg='unit=dracut-pre-udev comm=&systemd& exe=&/usr/lib/systemd/systemd& hostname=? addr=? terminal=? res=success'
2.573608] audit: type=1130 audit(.898:9): pid=1 uid=0 auid= ses= subj=kernel msg='unit=systemd-udevd comm=&systemd& exe=&/usr/lib/systemd/systemd& hostname=? addr=? terminal=? res=success'
2.608487] audit: type=1130 audit(.933:10): pid=1 uid=0 auid= ses= subj=kernel msg='unit=dracut-pre-trigger comm=&systemd& exe=&/usr/lib/systemd/systemd& hostname=? addr=? terminal=? res=success'
2.683326] usb 1-3: new full-speed USB device number 3 using xhci_hcd
2.777825] sdhci: Secure Digital Host Controller Interface driver
2.777832] sdhci: Copyright(c) Pierre Ossman
2.782160] sdhci-acpi : No vmmc regulator found
2.782168] sdhci-acpi : No vqmmc regulator found
2.786635] mmc0: SDHCI controller on ACPI [] using ADMA
2.789488] sdhci-acpi : No vmmc regulator found
2.789495] sdhci-acpi : No vqmmc regulator found
2.792274] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
2.795613] mmc1: SDHCI controller on ACPI [] using ADMA
2.855630] usb 1-3: New USB device found, idVendor=045e, idProduct=07de
2.855638] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
2.855641] usb 1-3: Product: Surface Type Cover
2.855644] usb 1-3: Manufacturer: Microsoft
2.869558] [drm] Initialized drm 1.1.0
2.896040] mmc0: MAN_BKOPS_EN bit is not set
2.904984] mmc0: new HS200 MMC card at address 0001
2.905235] input: Microsoft Surface Type Cover as /devices/pci0:00:14.0/usb1/1-3/1-3:1.0/DE.0001/input/input3
2.913347] mmcblk0: mmc0:0001 MDGAGC 116 GiB
2.914542] mmcblk0boot0: mmc0:0001 MDGAGC partition 1 4.00 MiB
2.914804] mmcblk0boot1: mmc0:0001 MDGAGC partition 2 4.00 MiB
2.914958] mmcblk0rpmb: mmc0:0001 MDGAGC partition 3 4.00 MiB
mmcblk0: p1 p2 p3 p4 p5 p6 p7
2.926327] usb 1-2.4: new full-speed USB device number 4 using xhci_hcd
2.957394] microsoft DE.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [Microsoft Surface Type Cover] on usb-.0-3/input0
3.013134] usb 1-2.4: New USB device found, idVendor=046d, idProduct=c52b
3.013142] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
3.013145] usb 1-2.4: Product: USB Receiver
3.013148] usb 1-2.4: Manufacturer: Logitech
3.091443] usb 1-2.6: new full-speed USB device number 5 using xhci_hcd
3.179814] usb 1-2.6: New USB device found, idVendor=0596, idProduct=0524
3.179828] usb 1-2.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
3.179842] usb 1-2.6: Product: 3M MicroTouch USB controller
3.179847] usb 1-2.6: Manufacturer: 3M
3.259174] usb 1-2.7: new high-speed USB device number 6 using xhci_hcd
3.443133] usb 1-2.7: New USB device found, idVendor=0bda, idProduct=570a
3.443149] usb 1-2.7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
3.443158] usb 1-2.7: Product: DELL S2340T Webcam
3.443167] usb 1-2.7: Manufacturer: 56.B10J
3.443173] usb 1-2.7: SerialNumber:
3.636115] usb 1-2.1: new high-speed USB device number 7 using xhci_hcd
3.724811] usb 1-2.1: New USB device found, idVendor=0424, idProduct=2134
3.724824] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
3.724837] usb 1-2.1: Product: USB2134
3.724842] usb 1-2.1: Manufacturer: SMSC
3.726292] hub 1-2.1:1.0: USB hub found
3.726405] hub 1-2.1:1.0: 4 ports detected
3.832992] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
4.292021] systemd-journald[168]: Received SIGTERM from PID 1 (systemd).
4.438886] SELinux: 32768 avtab hash slots, 103234 rules.
4.471071] SELinux: 32768 avtab hash slots, 103234 rules.
4.549894] SELinux:
8 users, 14 roles, 4897 types, 305 bools, 1 sens, 1024 cats
4.549902] SELinux:
92 classes, 103234 rules
4.556286] SELinux:
Completing initialization.
4.556313] SELinux:
Setting up existing superblocks.
4.583686] systemd[1]: Successfully loaded SELinux policy in 188.208ms.
4.607101] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
4.699847] systemd[1]: Relabelled /dev and /run in 82.889ms.
5.051189] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)
5.114132] RPC: Registered named UNIX socket transport module.
5.114138] RPC: Registered udp transport module.
5.114140] RPC: Registered tcp transport module.
5.114142] RPC: Registered tcp NFSv4.1 backchannel transport module.
5.172967] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
5.193260] systemd-journald[502]: Received request to flush runtime journal from PID 1
5.723997] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
5.724552] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
5.728092] i2c_hid i2c-MSHW0102:00: Fetching the HID descriptor
5.728101] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=01 00
5.731335] i2c_hid i2c-MSHW0102:00: HID Descriptor: 1e 00 00 01 8e 06 02 00 03 00 3f 00 04 00 3f 00 05 00 06 00 5e 04 bd 07 03 00 00 00 00 00
5.733249] i2c_hid i2c-MSHW0102:00: entering i2c_hid_parse
5.733256] i2c_hid i2c-MSHW0102:00: i2c_hid_hwreset
5.733260] i2c_hid i2c-MSHW0102:00: i2c_hid_set_power
5.733264] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 00 08
5.734331] i2c_hid i2c-MSHW0102:00: input: 34 00 23 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5.738335] i2c_hid i2c-MSHW0102:00: input: 34 00 11 22 ab 4e 91 01 00 00 03 dc 04 53 65 6c 66 74 65 73 74 20 30 78 30 30 30 30 30 30 30 34 00 b7 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5.741327] i2c_hid i2c-MSHW0102:00: input: 34 00 11 1e 11 2d 07 03 02 00 00 00 00 00 00 00 57 a4 00 00 ab 4e 91 01 00 00 03 dc 04 53 65 6c 66 74 65 73 74 20 30 78 30 30 30 30 30 30 30 34 00 b7 00 00
5.742345] i2c_hid i2c-MSHW0102:00: resetting...
5.742360] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 00 01
5.745330] i2c_hid i2c-MSHW0102:00: input: 34 00 11 22 ab 4f 91 01 00 00 03 dc 04 53 65 6c 66 74 65 73 74 20 30 78 30 30 30 30 30 30 30 34 00 23 00 00 80 00 00 00 04 f2 ff 1f 00 00 00 00 74 f9 ff 1f
5.749330] i2c_hid i2c-MSHW0102:00: input: 34 00 11 1e 11 2d 07 03 18 00 00 00 0c 20 01 00 64 3e 00 20 fd 01 00 00 f1 ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 41 5b 00 00 4f c5 00 00
5.750257] wmi: Mapper loaded
5.753324] i2c_hid i2c-MSHW0102:00: input: 34 00 11 22 ab 50 91 01 00 00 03 dc 04 53 65 6c 66 74 65 73 74 20 30 78 30 30 30 30 30 30 30 34 00 4c 00 00 00 01 00 00 04 f2 ff 1f 00 00 00 00 74 f9 ff 1f
5.756320] i2c_hid i2c-MSHW0102:00: input: 34 00 11 1e 11 2d 07 03 02 00 00 00 00 00 00 00 57 a4 00 00 ab 50 91 01 00 00 03 dc 04 53 65 6c 66 74 65 73 74 20 30 78 30 30 30 30 30 30 30 34 00 4c 00 00
5.759322] i2c_hid i2c-MSHW0102:00: input: 34 00 11 22 ab 51 91 01 00 00 03 dc 04 53 65 6c 66 74 65 73 74 20 30 78 30 30 30 30 30 30 30 34 00 d8 ad de 34 90 04 40 01 00 00 00 a0 f1 ff 1f fb cf 00 00
5.763327] i2c_hid i2c-MSHW0102:00: input: 34 00 11 1e 11 2d 07 03 bf 89 00 00 cc f9 ff 1f ed 89 00 00 24 3f 00 20 f1 ff ff ff 00 00 00 00 1e 00 00 00 3d a5 00 00 ff ff 00 00 cc f9 ff 1f 13 00 00 00
5.764944] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: waiting...
5.768348] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: finished.
5.768358] i2c_hid i2c-MSHW0102:00: asking HID report descriptor
5.768363] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=02 00
5.818333] i2c_hid i2c-MSHW0102:00: Report Descriptor: 05 20 09 01 a1 01 85 01 05 20 09 73 a1 00 0a 09 03 15 00 25 02 75 08 95 01 a1 02 0a 30 08 0a 31 08 0a 32 08 b1 00 c0 0a 0e 03 15 00 27 ff ff ff ff 75 20 95 01 55 00 b1 02 0a 52 14 15 00 26 ff
5.819766] i2c_hid i2c-MSHW0102:00: i2c_hid_set_power
5.819774] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 01 08
5.824458] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
5.845074] random: nonblocking pool is initialized
5.880807] i2c i2c-6: Failed to register i2c client MSHW0011:00 at 0x6e (-16)
5.880816] i2c i2c-6: failed to add I2C device MSHW0011:00 from ACPI
5.885569] proc_thermal b.0: enabling device (0000 -& 0002)
5.890627] intel_sst_acpi :00: No matching machine driver found
5.897986] media: Linux media interface: v0.10
5.900205] logitech-djreceiver D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-.0-2.4/input2
5.953621] input: 3M 3M MicroTouch USB controller as /devices/pci0:00:14.0/usb1/1-2/1-2.6/1-2.6:1.0/24.0005/input/input4
5.957627] hid-multitouch 24.0005: input,hiddev0,hidraw2: USB HID v1.10 Pointer [3M 3M MicroTouch USB controller] on usb-.0-2.6/input0
5.963400] rtEC5640:00: Device with ID register 0x6308 is not rt5640/39
5.963731] mwifiex_pcie .0: enabling device (0000 -& 0002)
5.963973] mwifiex: rx work enabled, cpus 4
5.967068] Linux video capture interface: v2.00
6.156475] audit_printk_skb: 162 callbacks suppressed
6.156482] audit: type=1130 audit(.481:65): pid=1 uid=0 auid= ses= subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-cdad28\x2d4c0e\x2d93d5\x2d17cb6a415c7a comm=&systemd& exe=&/usr/lib/systemd/systemd& hostname=? addr=? terminal=? res=success'
6.178250] audit: type=1130 audit(.502:66): pid=1 uid=0 auid= ses= subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-5C9B\x2dF942 comm=&systemd& exe=&/usr/lib/systemd/systemd& hostname=? addr=? terminal=? res=success'
6.181591] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
6.189085] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
6.302207] usbcore: registered new interface driver snd-usb-audio
6.302496] uvcvideo: Found UVC 1.00 device DELL S2340T Webcam (0bda:570a)
6.312186] input: DELL S2340T Webcam as /devices/pci0:00:14.0/usb1/1-2/1-2.7/1-2.7:1.0/input/input5
6.312595] usbcore: registered new interface driver uvcvideo
6.312599] USB Video Class driver (1.1.1)
6.368462] i2c_hid i2c-MSHW0102:00: i2c_hid_set_power
6.368470] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 00 08
6.369920] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
6.369926] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 31 02 06 00
6.370828] i2c_hid i2c-MSHW0102:00: report (len=14): 0e 00 01 01 10 00 00 00 64 00 02 06 02 10
6.370836] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
6.370840] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 32 02 06 00
6.371553] i2c_hid i2c-MSHW0102:00: report (len=14): 0e 00 02 01 10 00 00 00 64 00 02 06 02 10
6.371560] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
6.371564] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 33 02 06 00
6.372818] i2c_hid i2c-MSHW0102:00: report (len=30): 1e 00 03 01 64 00 00 00 e8 03 02 06 02 64 28 00 0a 00 64 00 0b 00 64 00 40 1f 0f 27 41 1f
6.372825] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
6.372828] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 34 02 06 00
6.373572] i2c_hid i2c-MSHW0102:00: report (len=14): 0e 00 04 01 10 00 00 00 e8 03 02 06 02 10
6.373577] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
6.373580] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 20 06 00
6.377269] i2c_hid i2c-MSHW0102:00: report (len=63): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6.377275] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:63 / ret_size:3
6.377279] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
6.377282] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 21 06 00
6.380952] i2c_hid i2c-MSHW0102:00: report (len=63): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6.380956] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:63 / ret_size:3
6.380960] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
6.380962] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 22 06 00
6.381876] i2c_hid i2c-MSHW0102:00: report (len=19): 13 00 22 11 2d 07 03 00 00 00 00 00 00 00 00 00 00 00 00
6.381885] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
6.381889] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 23 06 00
6.385306] i2c_hid i2c-MSHW0102:00: report (len=19): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6.385311] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:19 / ret_size:3
6.385314] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
6.385317] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 24 06 00
6.387675] i2c_hid i2c-MSHW0102:00: report (len=19): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6.387679] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:19 / ret_size:3
6.387683] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
6.387686] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 25 06 00
6.389936] i2c_hid i2c-MSHW0102:00: report (len=19): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6.389941] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:19 / ret_size:3
6.389944] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
6.389947] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 26 06 00
6.392303] i2c_hid i2c-MSHW0102:00: report (len=19): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6.392307] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:19 / ret_size:3
6.392311] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
6.392314] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 27 06 00
6.394569] i2c_hid i2c-MSHW0102:00: report (len=19): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6.394574] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:19 / ret_size:3
6.394577] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
6.394580] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 28 06 00
6.403249] i2c_hid i2c-MSHW0102:00: report (len=19): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6.403254] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:19 / ret_size:3
6.403257] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
6.403260] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 29 06 00
6.406306] i2c_hid i2c-MSHW0102:00: report (len=19): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6.406311] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:19 / ret_size:3
6.406737] i2c_hid i2c-MSHW0102:00: i2c_hid_set_power
6.406741] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 01 08
6.415968] intel_rapl: Found RAPL domain package
6.415975] intel_rapl: Found RAPL domain core
6.457446] iTCO_vendor_support: vendor-support=0
6.460919] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
6.461059] iTCO_wdt: Found a Braswell SoC TCO device (Version=3, TCOBASE=0x0460)
6.468492] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
6.501451] cfg80211: World regulatory domain updated:
6.501460] cfg80211:
DFS Master region: unset
6.501462] cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
6.501467] cfg80211:
(2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
6.501470] cfg80211:
(2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
6.501472] cfg80211:
(2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
6.501475] cfg80211:
(5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
6.501479] cfg80211:
(5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
6.501481] cfg80211:
(5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
6.501484] cfg80211:
(5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
6.501486] cfg80211:
KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
6.501782] input: Logitech K750 as /devices/pci0:00:14.0/usb1/1-2/1-2.4/1-2.4:1.2/D:C52B.6D:/input/input6
6.508473] logitech-hidpp-device 02.0007: input,hidraw3: USB HID v1.11 Keyboard [Logitech K750] on usb-.0-2.4:1
6.513876] logitech-hidpp-device 01.0008: hidraw4: USB HID v1.11 Keyboard [Logitech T650] on usb-.0-2.4:2
6.632786] usb 1-2: USB disconnect, device number 2
6.632794] usb 1-2.1: USB disconnect, device number 7
6.633427] usb 1-2.4: USB disconnect, device number 4
6.973656] mwifiex_pcie .0: info: FW download over, size 759128 bytes
7.019691] usb 1-2.6: USB disconnect, device number 5
7.029537] audit: type=1130 audit(.354:67): pid=1 uid=0 auid= ses= subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm=&systemd& exe=&/usr/lib/systemd/systemd& hostname=? addr=? terminal=? res=success'
7.044750] usb 1-2.7: USB disconnect, device number 6
7.098269] audit: type=1130 audit(.422:68): pid=1 uid=0 auid= ses= subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm=&systemd& exe=&/usr/lib/systemd/systemd& hostname=? addr=? terminal=? res=success'
7.098323] audit: type=1131 audit(.422:69): pid=1 uid=0 auid= ses= subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm=&systemd& exe=&/usr/lib/systemd/systemd& hostname=? addr=? terminal=? res=success'
7.130347] audit: type=1130 audit(.454:70): pid=1 uid=0 auid= ses= subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm=&systemd& exe=&/usr/lib/systemd/systemd& hostname=? addr=? terminal=? res=success'
7.131370] audit: type=1130 audit(.456:71): pid=1 uid=0 auid= ses= subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm=&systemd& exe=&/usr/lib/systemd/systemd& hostname=? addr=? terminal=? res=success'
7.138844] audit: type=1130 audit(.463:72): pid=1 uid=0 auid= ses= subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm=&systemd& exe=&/usr/lib/systemd/systemd& hostname=? addr=? terminal=? res=success'
7.138885] audit: type=1131 audit(.463:73): pid=1 uid=0 auid= ses= subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm=&systemd& exe=&/usr/lib/systemd/systemd& hostname=? addr=? terminal=? res=success'
7.165370] audit: type=1130 audit(.490:74): pid=1 uid=0 auid= ses= subj=system_u:system_r:init_t:s0 msg='unit=fedora-import-state comm=&systemd& exe=&/usr/lib/systemd/systemd& hostname=? addr=? terminal=? res=success'
7.714927] usb 1-4: new high-speed USB device number 8 using xhci_hcd
7.879600] usb 1-4: New USB device found, idVendor=1286, idProduct=204c
7.879607] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
7.879611] usb 1-4: Product: Bluetooth and Wireless LAN Composite Device
7.879613] usb 1-4: Manufacturer: Marvell
7.879616] usb 1-4: SerialNumber: 0000
7.986455] mwifiex_pcie .0: WLAN FW is active
8.003453] Bluetooth: Core ver 2.21
8.004139] NET: Registered protocol family 31
8.004144] Bluetooth: HCI device and connection manager initialized
8.004153] Bluetooth: HCI socket layer initialized
8.004159] Bluetooth: L2CAP socket layer initialized
8.004180] Bluetooth: SCO socket layer initialized
8.029932] usbcore: registered new interface driver btusb
8.086243] mwifiex_pcie .0 mlan0: set_features() failed (-1); wanted 0x4000, left 0x4800
8.094175] mwifiex_pcie .0: info: MWIFIEX VERSION: mwifiex 1.0 (15.68.4.p112)
8.094183] mwifiex_pcie .0: driver_version = mwifiex 1.0 (15.68.4.p112)
8.104765] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
8.104771] Bluetooth: BNEP filters: protocol multicast
8.104781] Bluetooth: BNEP socket layer initialized
8.115399] mwifiex_pcie .0 wlp1s0: renamed from mlan0
8.166481] cfg80211: Regulatory domain changed to country: FR
8.166490] cfg80211:
DFS Master region: ETSI
8.166493] cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
8.166497] cfg80211:
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
8.166500] cfg80211:
(5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
8.166503] cfg80211:
(5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
8.166506] cfg80211:
(5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
8.166509] cfg80211:
KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
8.373062] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
8.454501] ip6_tables: (C)
Netfilter Core Team
8.602893] Ebtables v2.0 registered
8.645175] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
9.553171] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
9.555997] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
9.729716] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
11.112797] mwifiex_pcie .0: info: trying to associate to 'idoru' bssid f4:ca:e5:c2:74:6c
11.151645] mwifiex_pcie .0: info: associated to bssid f4:ca:e5:c2:74:6c successfully
11.151703] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
12.448526] fuse init (API version 7.23)
12.615691] tun: Universal TUN/TAP device driver, 1.6
12.615696] tun: (C)
Max Krasnyansky &maxk@xxxxxxxxxxxx&
12.617144] virbr0-nic: set_features() failed (-1); wanted 0x48c1, left 0xb48c9
12.664950] virbr0-nic: set_features() failed (-1); wanted 0x48c1, left 0xb48c9
12.664974] device virbr0-nic entered promiscuous mode
12.665019] virbr0: set_features() failed (-1); wanted 0xfdb78c9, left 0xfff78e9
13.001815] virbr0: set_features() failed (-1); wanted 0xfdb78c9, left 0xfff78e9
13.001868] virbr0: port 1(virbr0-nic) entered listening state
13.001884] virbr0: port 1(virbr0-nic) entered listening state
13.011555] mwifiex_pcie .0 wlp1s0: set_features() failed (-1); wanted 0x6000, left 0x6800
13.011619] virbr0: set_features() failed (-1); wanted 0xfdb78c9, left 0xfff78e9
13.011671] virbr0-nic: set_features() failed (-1); wanted 0x48c1, left 0xb48c9
13.011699] virbr0: set_features() failed (-1); wanted 0xfdb78c9, left 0xfff78e9
13.011726] virbr0-nic: set_features() failed (-1); wanted 0x48c1, left 0xb48c9
13.011747] virbr0: set_features() failed (-1); wanted 0xfdb78c9, left 0xfff78e9
13.107427] virbr0: port 1(virbr0-nic) entered disabled state
13.282532] Bluetooth: RFCOMM TTY layer initialized
13.282938] Bluetooth: RFCOMM socket layer initialized
13.284771] Bluetooth: RFCOMM ver 1.11
15.569185] mwifiex_pcie .0: Rx of mgmt packet failed
51.727275] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
145.848207] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
145.861772] usb 2-2: New USB device found, idVendor=1b8f, idProduct=0305
145.861784] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
145.861791] usb 2-2: Product: EXPRESS DUO
145.861797] usb 2-2: Manufacturer: STT
145.861802] usb 2-2: SerialNumber: 0506
145.927756] usb-storage 2-2:1.0: USB Mass Storage device detected
145.928129] scsi host0: usb-storage 2-2:1.0
145.928874] usbcore: registered new interface driver usb-storage
145.934957] usbcore: registered new interface driver uas
146.930454] scsi 0:0:0:0: Direct-Access
EXPRESS DUO
1.00 PQ: 0 ANSI: 5
146.932927] sd 0:0:0:0: Attached scsi generic sg0 type 0
146.933068] sd 0:0:0:0: [sda] -byte logical blocks: (15.7 GB/14.6 GiB)
146.935184] sd 0:0:0:0: [sda] Write Protect is off
146.935195] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
146.935459] sd 0:0:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
146.939092]
146.940200] sd 0:0:0:0: [sda] Attached SCSI removable disk
147.191570] FAT-fs (sda): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
175.356774] mwifiex_pcie .0: Rx of mgmt packet failed
To unsubscribe from this list: send the line &unsubscribe linux-iio& in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at
Prev by Date:
Next by Date:
Previous by thread:
Next by thread:
Index(es):