温馨提示！由于新浪微博认证机制调整，您的新浪微博帐号绑定已过期，请重新绑定！&&|&&
LOFTER精选
网易考拉推荐
用微信&&“扫一扫”
将文章分享到朋友圈。
用易信&&“扫一扫”
将文章分享到朋友圈。
&在弹出的对话框中输入网络服务器的相关信息，如下图所示：此时，如果可能会弹出对话框要求输入管理员为你分配的用户名和密码。如果记住了密码以后不会再提示。最后，链接成功后，点击Dolphin文件管理器窗口左边的“网络”，右边会显示刚才连接的网络文件夹，如下图所示：&&
阅读(1810)|
用微信&&“扫一扫”
将文章分享到朋友圈。
用易信&&“扫一扫”
将文章分享到朋友圈。
历史上的今天
在LOFTER的更多文章
loftPermalink:'',
id:'fks_',
blogTitle:'Ubuntu访问Windows共享文件夹',
blogAbstract:'备注：1）Ubuntu版本：12.042）Linux用户：root3）工作环境：Ubuntu+KDE桌面步骤：1. 在Ubuntu软件包管理器中安装samba必须的软件。2. 有两种方法可以访问Windows共享文件夹分别如下：方法一：在Ubuntu文件夹（Dolphin）的位置编辑框中输入如下地址：smb://服务器IP/例如：smb://192.168.100.17/即可登陆Windows主机，然后双击你需要登入的文件夹，这个时候会弹出对话框让你输入Windows管理员为你分配的用户名及密码。方法二：在KDE的Dolphin文件夹管理器中单击左边的“网络”，然后双击“添加网络文件夹”。如下图所示：',
blogTag:'',
blogUrl:'blog/static/7',
isPublished:1,
istop:false,
modifyTime:9,
publishTime:5,
permalink:'blog/static/7',
commentCount:0,
mainCommentCount:0,
recommendCount:0,
bsrk:-100,
publisherId:0,
recomBlogHome:false,
currentRecomBlog:false,
attachmentsFileIds:[],
groupInfo:{},
friendstatus:'none',
followstatus:'unFollow',
pubSucc:'',
visitorProvince:'',
visitorCity:'',
visitorNewUser:false,
postAddInfo:{},
mset:'000',
remindgoodnightblog:false,
isBlackVisitor:false,
isShowYodaoAd:true,
hostIntro:'',
hmcon:'0',
selfRecomBlogCount:'0',
lofter_single:''
{list a as x}
{if x.moveFrom=='wap'}
{elseif x.moveFrom=='iphone'}
{elseif x.moveFrom=='android'}
{elseif x.moveFrom=='mobile'}
${a.selfIntro|escape}{if great260}${suplement}{/if}
{list a as x}
推荐过这篇日志的人：
{list a as x}
{if !!b&&b.length>0}
他们还推荐了：
{list b as y}
转载记录：
{list d as x}
{list a as x}
{list a as x}
{list a as x}
{list a as x}
{if x_index>4}{break}{/if}
${fn2(x.publishTime,'yyyy-MM-dd HH:mm:ss')}
{list a as x}
{if !!(blogDetail.preBlogPermalink)}
{if !!(blogDetail.nextBlogPermalink)}
{list a as x}
{if defined('newslist')&&newslist.length>0}
{list newslist as x}
{if x_index>7}{break}{/if}
{list a as x}
{var first_option =}
{list x.voteDetailList as voteToOption}
{if voteToOption==1}
{if first_option==false},{/if}&&“${b[voteToOption_index]}”&&
{if (x.role!="-1") },“我是${c[x.role]}”&&{/if}
&&&&&&&&${fn1(x.voteTime)}
{if x.userName==''}{/if}
网易公司版权所有&&
{list x.l as y}
{if defined('wl')}
{list wl as x}{/list}【记录】VMWare Workstation中实现Win7和Ubuntu虚拟机之间的文件共享
期间，需要把win7中的文件，共享到VMware Workstation的虚拟机Ubuntu中。
【折腾过程】
1.去VMWare中，VM-&Settings：
2.默认的文件共享：
Options-&Shared Folders：
是关闭的：
Always Enabled：
然后再去添加文件夹：
7.然后进去Ubuntu中，看看能否看到和使用此共享。
结果直接出错：
看来需要重启Ubuntu才可以的。
8.重启后，进入Ubuntu，参考：
但是在/mnt下没有看到希望的hgfs：
所以，再参考：
去看看vmhgfs是否安装了，结果没有：
crifan@ubuntu:/mnt$
lsmod | grep vmhgfs
crifan@ubuntu:/mnt$ lsmod
bnep,rfcomm
aesni_intel
1 aesni_intel
1 aesni_intel
1 aesni_intel
ablk_helper
1 aesni_intel
1 ablk_helper
snd_ens1371
snd_ac97_codec
snd_ens1371
1 snd_ac97_codec
1 snd_ens1371
parport_pc
2 snd_ac97_codec,snd_ens1371
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
1 snd_seq_midi
snd_rawmidi
2 snd_ens1371,snd_seq_midi
2 snd_seq_midi_event,snd_seq_midi
snd_seq_device
3 snd_seq,snd_rawmidi,snd_seq_midi
2 snd_pcm,snd_seq
11 snd_ac97_codec,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_ens1371,snd_seq_device
vmw_balloon
ttm,vmwgfx
3 lp,ppdev,parport_pc
hid_generic
2 hid_generic,usbhid
2 mptspi,mptscsih
vmw_pvscsi
crifan@ubuntu:/mnt$
9.所以去手动insmod试试，结果根本没此模块：
crifan@ubuntu:/mnt$ modprobe vmhgfs
FATAL: Module vmhgfs not found.
10.所以，只能参考：
再去安装vmware tools：
大事却看到是已经安装过的，所以显示uninstall：
11.但是参考之前的帖子，是可以看到共享的文件夹的：
crifan@ubuntu:/mnt$ vmware-hgfsclient
crosstool_ng_src
但是接下来去尝试弄pl脚本，结果太麻烦：
crifan@ubuntu:/mnt$ sudo vmware-config-tools.pl
Initializing...
Making sure services for VMware Tools are stopped.
vmware-tools stop/waiting
[EXPERIMENTAL] The VMware FileSystem Sync Driver (vmsync) is a new feature that
creates backups of virtual machines. Please refer to the VMware Knowledge Base
for more details on this capability. Do you wish to enable this feature?
Before you can compile modules, you need to have the following installed...
kernel headers of the running kernel
Searching for GCC...
Detected GCC binary at &/usr/bin/gcc&.
The path &/usr/bin/gcc& appears to be a valid path to the gcc binary.
Would you like to change it? [no]
Searching for a valid kernel header path...
The path && is not a valid path to the 3.8.0-19-generic kernel headers.
Would you like to change it? [yes]
Enter the path to the kernel header files for the 3.8.0-19-generic kernel?
The path && is not a valid path to the 3.8.0-19-generic kernel headers.
Would you like to change it? [yes]
Enter the path to the kernel header files for the 3.8.0-19-generic kernel?
The path && is not a valid path to the 3.8.0-19-generic kernel headers.
Would you like to change it? [yes]
Enter the path to the kernel header files for the 3.8.0-19-generic kernel?
The path && is not a valid path to the 3.8.0-19-generic kernel headers.
Would you like to change it? [yes]
Enter the path to the kernel header files for the 3.8.0-19-generic kernel?
The path && is not a valid path to the 3.8.0-19-generic kernel headers.
Would you like to change it? [yes]
Enter the path to the kernel header files for the 3.8.0-19-generic kernel? ^C
Execution aborted.
crifan@ubuntu:/mnt$ ^C
crifan@ubuntu:/mnt$ ^C
crifan@ubuntu:/mnt$ gksu gedit /etc/fstab
The program 'gksu' is currently not installed. You can install it by typing:
sudo apt-get install gksu
crifan@ubuntu:/mnt$
12.还是去试试别人的：
就可以了：
crifan@ubuntu:/mnt$ sudo apt-get install open-vm-tools
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
dkms ethtool fakeroot libdumbnet1 open-vm-dkms zerofree
Suggested packages:
dpkg-dev debhelper open-vm-toolbox
The following NEW packages will be installed:
dkms ethtool fakeroot libdumbnet1 open-vm-dkms open-vm-tools zerofree
0 upgraded, 7 newly installed, 0 to remove and 198 not upgraded.
Need to get 1,141 kB of archives.
After this operation, 9,508 kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://us./ubuntu/ raring/main dkms all 2.2.0.3-1.1ubuntu2 [72.8 kB]
Get:2 http://us./ubuntu/ raring/main ethtool i386 1:3.4.2-1 [98.3 kB]
Get:3 http://us./ubuntu/ raring/main ethtool i386 1:3.4.2-1 [98.3 kB]
Get:4 http://us./ubuntu/ raring/main fakeroot i386 1.18.4-2ubuntu1 [89.0 kB]
Err http://us./ubuntu/ raring/main fakeroot i386 1.18.4-2ubuntu1
Connection failed [IP: 91.189.91.14 80]
Get:5 http://us./ubuntu/ raring/universe libdumbnet1 i386 1.12-3.1 [30.7 kB]
Get:6 http://us./ubuntu/ raring/multiverse open-vm-dkms all -ubuntu3 [394 kB]
Get:7 http://us./ubuntu/ raring/multiverse open-vm-dkms all -ubuntu3 [394 kB]
Get:8 http://us./ubuntu/ raring/multiverse open-vm-tools i386 -ubuntu3 [448 kB]
Get:9 http://us./ubuntu/ raring/universe zerofree i386 1.0.2-1ubuntu1 [8,574 B]
Fetched 954 kB in 11min 38s (1,366 B/s)
Failed to fetch http://us./ubuntu/pool/main/f/fakeroot/fakeroot_1.18.4-2ubuntu1_i386.deb
Connection failed [IP: 91.189.91.14 80]
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
crifan@ubuntu:/mnt$ sudo apt-get install open-vm-tools
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
dkms ethtool fakeroot libdumbnet1 open-vm-dkms zerofree
Suggested packages:
dpkg-dev debhelper open-vm-toolbox
The following NEW packages will be installed:
dkms ethtool fakeroot libdumbnet1 open-vm-dkms open-vm-tools zerofree
0 upgraded, 7 newly installed, 0 to remove and 198 not upgraded.
Need to get 89.0 kB/1,141 kB of archives.
After this operation, 9,508 kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://us./ubuntu/ raring/main fakeroot i386 1.18.4-2ubuntu1 [89.0 kB]
Fetched 41.1 kB in 1s (33.7 kB/s)
Selecting previously unselected package dkms.
(Reading database ... 155956 files and directories currently installed.)
Unpacking dkms (from .../dkms_2.2.0.3-1.1ubuntu2_all.deb) ...
Selecting previously unselected package ethtool.
Unpacking ethtool (from .../ethtool_1%3a3.4.2-1_i386.deb) ...
Selecting previously unselected package fakeroot.
Unpacking fakeroot (from .../fakeroot_1.18.4-2ubuntu1_i386.deb) ...
Selecting previously unselected package libdumbnet1.
Unpacking libdumbnet1 (from .../libdumbnet1_1.12-3.1_i386.deb) ...
Selecting previously unselected package open-vm-dkms.
Unpacking open-vm-dkms (from .../open-vm-dkms_-ubuntu3_all.deb) ...
Selecting previously unselected package open-vm-tools.
Unpacking open-vm-tools (from .../open-vm-tools_-ubuntu3_i386.deb) ...
Selecting previously unselected package zerofree.
Unpacking zerofree (from .../zerofree_1.0.2-1ubuntu1_i386.deb) ...
Processing triggers for man-db ...
Processing triggers for ureadahead ...
ureadahead will be reprofiled on next reboot
Setting up dkms (2.2.0.3-1.1ubuntu2) ...
Setting up ethtool (1:3.4.2-1) ...
Setting up fakeroot (1.18.4-2ubuntu1) ...
update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode
Setting up libdumbnet1 (1.12-3.1) ...
Setting up open-vm-dkms (-ubuntu3) ...
Loading new open-vm-tools- DKMS files...
First Installation: checking all kernels...
Building only for 3.8.0-19-generic
Building for architecture i686
Building initial module for 3.8.0-19-generic
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/3.8.0-19-generic/updates/dkms/
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/3.8.0-19-generic/updates/dkms/
vmhgfs.ko:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/3.8.0-19-generic/updates/dkms/
vmxnet.ko:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/3.8.0-19-generic/updates/dkms/
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/3.8.0-19-generic/updates/dkms/
depmod....
DKMS: install completed.
Setting up open-vm-tools (-ubuntu3) ...
Configuration file `/etc/vmware-tools/suspend-vm-default'
==& File on system created by you or by a script.
==& File also in package provided by package maintainer.
What would you like to do about it ?
Your options are:
: install the package maintainer's version
: keep your currently-installed version
: show the differences between the versions
: start a shell to examine the situation
The default action is to keep your current version.
*** suspend-vm-default (Y/I/N/O/D/Z) [default=N] ?
Configuration file `/etc/vmware-tools/poweron-vm-default'
==& File on system created by you or by a script.
==& File also in package provided by package maintainer.
What would you like to do about it ?
Your options are:
: install the package maintainer's version
: keep your currently-installed version
: show the differences between the versions
: start a shell to examine the situation
The default action is to keep your current version.
*** poweron-vm-default (Y/I/N/O/D/Z) [default=N] ?
Configuration file `/etc/vmware-tools/scripts/vmware/network'
==& File on system created by you or by a script.
==& File also in package provided by package maintainer.
What would you like to do about it ?
Your options are:
: install the package maintainer's version
: keep your currently-installed version
: show the differences between the versions
: start a shell to examine the situation
The default action is to keep your current version.
*** network (Y/I/N/O/D/Z) [default=N] ?
Configuration file `/etc/vmware-tools/resume-vm-default'
==& File on system created by you or by a script.
==& File also in package provided by package maintainer.
What would you like to do about it ?
Your options are:
: install the package maintainer's version
: keep your currently-installed version
: show the differences between the versions
: start a shell to examine the situation
The default action is to keep your current version.
*** resume-vm-default (Y/I/N/O/D/Z) [default=N] ?
Configuration file `/etc/vmware-tools/statechange.subr'
==& File on system created by you or by a script.
==& File also in package provided by package maintainer.
What would you like to do about it ?
Your options are:
: install the package maintainer's version
: keep your currently-installed version
: show the differences between the versions
: start a shell to examine the situation
The default action is to keep your current version.
*** statechange.subr (Y/I/N/O/D/Z) [default=N] ?
Configuration file `/etc/vmware-tools/poweroff-vm-default'
==& File on system created by you or by a script.
==& File also in package provided by package maintainer.
What would you like to do about it ?
Your options are:
: install the package maintainer's version
: keep your currently-installed version
: show the differences between the versions
: start a shell to examine the situation
The default action is to keep your current version.
*** poweroff-vm-default (Y/I/N/O/D/Z) [default=N] ?
update-initramfs: deferring update (trigger activated)
* Loading open-vm-tools modules
* Remove pcnet32 module, if vmxnet is loaded
* Starting open-vm daemon vmtoolsd
Setting up zerofree (1.0.2-1ubuntu1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Processing triggers for ureadahead ...
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-3.8.0-19-generic
crifan@ubuntu:/mnt$ sudo mkdir /mnt/hgfs
crifan@ubuntu:/mnt$ sudo mout -t vmhgfs .host:/ /mnt/hgfs
sudo: mout: command not found
crifan@ubuntu:/mnt$ sudo mount -t vmhgfs .host:/ /mnt/hgfs
crifan@ubuntu:/mnt$ ls /mnt/hgfs/ -l
drwxrwxrwx 1 root root 8192 Jul 31 01:58 crosstool_ng_src
crifan@ubuntu:/mnt$ ll /mnt/hgfs/crosstool_ng_src/
total 232564
drwxrwxrwx 1 root root
8192 Jul 31 01:58 ./
dr-xr-xr-x 1 root root
7 02:39 ../
-rwxrwxrwx 1 root root
Jul 23 01:00 binutils-2.20.tar.bz2*
-rwxrwxrwx 1 root root
Jul 23 00:00 binutils-2.22.tar.bz2*
-rwxrwxrwx 1 root root
772737 Jul 24 22:44 cloog-ppl-0.15.11.tar.gz*
-rwxrwxrwx 1 root root
572629 Jul 23 00:21 dmalloc-5.5.2.tar.bz2*
-rwxrwxrwx 1 root root
343078 Jul 23 02:45 expat-2.0.1.tar.bz2*
-rwxrwxrwx 1 root root
446456 Jul 23 02:40 expat-2.0.1.tar.gz*
-rwxrwxrwx 1 root root
562616 Jul 24 01:33 expat-2.1.0.tar.gz*
-rwxrwxrwx 1 root root
Jul 24 01:25 gcc-4.2.2.tar.bz2*
-rwxrwxrwx 1 root root
Jul 23 00:14 gcc-4.4.3.tar.bz2*
-rwxrwxrwx 1 root root
Jul 24 22:22 gcc-4.4.6.tar.bz2*
-rwxrwxrwx 1 root root
Jul 25 02:38 gcc-4.6.0.tar.bz2*
-rwxrwxrwx 1 root root
Jul 24 01:28 gdb-6.8a.tar.bz2*
-rwxrwxrwx 1 root root
Jul 23 00:22 gdb-6.8.tar.bz2*
-rwxrwxrwx 1 root root
Jul 23 00:15 glibc-2.9.tar.bz2*
-rw-rw-rw- 1 root root
457264 Jul 23 01:03 glibc-ports-2.9.tar.bz2
-rwxrwxrwx 1 root root
1897483 Jul 23 00:22 gmp-4.3.2.tar.bz2*
-rwxrwxrwx 1 root root
2024576 Jul 24 22:25 gmp-5.0.2.tar.bz2*
-rw-rw-rw- 1 root root
148529 Nov
2009 libelf-0.8.13.tar.gz
-rwxrwxrwx 1 root root
2012 linux-2.6.19.1.tar.bz2*
-rwxrwxrwx 1 root root
Jul 23 00:08 linux-2.6.36.tar.bz2*
-rw-rw-rw- 1 root root
147198 Jul 25
2009 ltrace_0.5.3.orig.tar.gz
-rw-rw-rw- 1 root root
1151445 Mar 31
2006 make-3.81.tar.bz2
-rw-rw-rw- 1 root root
565953 Feb 21
2011 mpc-0.9.tar.gz
-rwxrwxrwx 1 root root
1077886 Jul 23 00:23 mpfr-2.4.2.tar.bz2*
-rw-rw-rw- 1 root root
1083128 Oct
2011 mpfr-3.1.0.tar.xz
-rwxrwxrwx 1 root root
1276843 Jul 23 02:16 ncurses-5.7.tar.bz2*
-rwxrwxrwx 1 root root
2445052 Jul 23 01:41 ncurses-5.7.tar.gz*
-rwxrwxrwx 1 root root
2826473 Jul 24 01:30 ncurses-5.9.tar.gz*
-rwxrwxrwx 1 root root
Jul 24 22:37 ppl-0.11.2.tar.bz2*
-rwxrwxrwx 1 root root
499565 Jul 23 00:18 strace-4.5.19.tar.bz2*
crifan@ubuntu:/mnt$
1. 第一次安装Ubuntu的时候：
就已经看到有安装VMWare Tools了
2.本以为此处只需要去开启文件共享，然后直接添加文件夹即可。
设置好共享文件夹后。
3.结果出错，/mnt下，找不到hgfs文件夹。
后来是用如下命令，解决的：
sudo apt-get install open-vm-tools
sudo mkdir /mnt/hgfs
sudo mount -t vmhgfs .host:/ /mnt/hgfs
共享此文章：
免费的格式化Javascript源码的网站
查询Unicode字符，且还带Oct,Decimal,Hex,HTML Entity
HTML和Javascript都支持，很好用。如何切换访问windows共享文件夹的用户 - 查看主题 & Ubuntu中文论坛
&[ 7 篇帖子 ]&
&文章标题 : 如何切换访问windows共享文件夹的用户发表于 :
15:58帖子: 66
送出感谢: 0 次
接收感谢: 0 次
RT：我访问windows共享文件夹，并记住了用户名密码，现在为想换一个用户名密码去访问这个共享文件夹，怎么办？在线等。急
&文章标题 : Re: 如何切换访问windows共享文件夹的用户发表于 :
16:33帖子: 13990
請提供 windows 版本
&文章标题 : Re: 如何切换访问windows共享文件夹的用户发表于 :
15:58帖子: 66
送出感谢: 0 次
接收感谢: 0 次
poloshiao 写道:請提供 windows 版本windows2003
&文章标题 : Re: 如何切换访问windows共享文件夹的用户发表于 :
16:33帖子: 13990
引用:现在为想换一个用户名密码去访问這個 用戶名/密碼 在 windows2003 可以登入嗎 ? 在 文件分享 設定 有登錄 訪問的權限嗎
&文章标题 : Re: 如何切换访问windows共享文件夹的用户发表于 :
15:58帖子: 66
送出感谢: 0 次
接收感谢: 0 次
poloshiao 写道:引用:现在为想换一个用户名密码去访问這個 用戶名/密碼 在 windows2003 可以登入嗎 ? 在 文件分享 設定 有登錄 訪問的權限嗎是这样的，我用的ubuntu系统，成功访问了windows共享文件夹，并记住了用户名和密码。。现在我想用另外一个用户名密码去访问这个目录，要怎么做？现在每次进那个目录，都是使用第一次记住的那个用户密码。
&文章标题 : Re: 如何切换访问windows共享文件夹的用户发表于 :
16:33帖子: 13990
引用:现在我想用另外一个用户名密码去访问这个目录，要怎么做？簡單說 這個用戶與密碼 需要在 Windows 的 server 端能夠登入 或者 寫進 分享文件的設定檔具體的做法 需要看 Windows 的作業系統 以及 分享 Server 端的程式及設定方式
&文章标题 : Re: 如何切换访问windows共享文件夹的用户发表于 :
15:58帖子: 66
送出感谢: 0 次
接收感谢: 0 次
poloshiao 写道:引用:现在我想用另外一个用户名密码去访问这个目录，要怎么做？簡單說 這個用戶與密碼 需要在 Windows 的 server 端能夠登入 或者 寫進 分享文件的設定檔具體的做法 需要看 Windows 的作業系統 以及 分享 Server 端的程式及設定方式
这么复杂吗？我只是想清除ubuntu桌面本地记录的登录windows共享文件夹的用户名与密码。我另外一台windows系统，直接在用户管理里面，将访问这个共享文件夹的记录清除掉，下次再去登录这个共享文件夹的时候就需要输入用户密码了。
显示帖子 : 全部帖子1天7天2周1个月3个月6个月1年&排序 作者发表时间文章标题 升序降序&
&[ 7 篇帖子 ]&
正在浏览此版面的用户：Sogou [Spider] 和 4 位游客
您 不能 在这个版面发表主题您 不能 在这个版面回复主题您 不能 在这个版面编辑帖子您 不能 在这个版面删除帖子您 不能 在这个版面提交附件
选择一个版面
------------------
公告/注意事项
& &新闻和通知
& &校园社团支持
& && &华东校区
& && &华南校区
& && &华北校区
& && &华中校区
& && &东北校区
& && &西北校区
& && &港澳台校区
& && &国外校区
& &软件推荐
& &非常任务
系统安装区
& &教学和常见问答
& && &课堂教学和培训
& &初学者园地 - 16.04
& &系统安装和升级
& && &新立得和软件源
& && &Wubi安装讨论
& &启动和引导
& &网卡问题以及网络和拨号
& && &校园网拨号
& &笔记本、UMPC支持
& &手机和平板
& && &Ubuntu移动应用开发
& &常用硬件支持
& &系统架构支持
配置美化区
& &字体美化和中文支持
& && &个人配置文件存放点
& &桌面特效
& &窗口管理器
& &屏幕抓图
& &办公、图像、机械电子设计等
& && &Vim和Emacs
& &因特网相关软件
& &影音多媒体
& &Wine及其分支
& &游戏和游戏模拟器
& &虚拟机和虚拟化
& &其它类软件
& &开源模板库
服务器管理
& &服务器基础应用
& &数据库管理
& &服务器维护和硬件相关
& &Ubuntu VPS
参与Ubuntu开发
& &软件和文档翻译
& &编译或打包
& &Ubuntu错误报告
程序设计区
& &Shell脚本
& &GTK+和QT
& &软件/网站开发
& && &Python/Php/Perl
& && &C/C++/Java
& &内核及嵌入式开发
& &开源小工具
& &Ubuntu 16.10
& &Ubuntu 14.04 LTS
& &Ubuntu 12.04 LTS
& &Ubuntu 10.04 LTS
& &老旧版本支持
& && &Ubuntu 15.10
& && &Ubuntu 15.04
& && &Ubuntu 14.10
衍生发行版
& &Ubuntu GNOME
& &Kubuntu
& &Xubuntu & Lubuntu
& &Ubuntu中文衍生版
& && &UbuntuKylin
& &Ubuntu国外衍生版
& && &Mint
& &Ubuntu衍生版制作
& &其它类Unix OS发行版
& && &Arch发行版
& && &Debian发行版
& && &OpenSUSE发行版
& && &Deepin
& &深度PK版
& &Ubuntu故事和感慨
& &Full Circle开源杂志
分享交流区
& &同城交流
& &线下活动专版
& &Ubuntu宣传推广
& &论坛管理
& && && &Ubuntu中文网上商店