4.5. The “Capture Options” dialog box4.5. The “Capture Options” dialog boxWhen you select Capture → Options… (or use the corresponding item in the
main toolbar), Wireshark pops up the “Capture Options” dialog box as shown in
.Figure 4.3. The “Capture Options” dialog boxTipIf you are unsure which options to choose in this dialog box just try keeping
the defaults as this should work well in many cases.4.5.1. Capture frameThe table shows the settings for all available interfaces:
The name of the interface and its IP addresses. If no address could be
resolved from the system, “none” will be shown.
NoteLoopback interfaces are not available on Windows platforms.
The link-layer header type.
The information whether promicuous mode is enabled or disabled.
The maximum amount of data that will be captured for each packet. The default
value is set to the 262144 bytes.
The size of the kernel buffer that is reserved to keep the captured packets.
The information whether packets will be captured in monitor mode (Unix/Linux
The chosen capture filter.
By marking the checkboxes in the first column the interfaces are selected to be
captured from. By double-clicking on an interface the “Edit Interface Settings”
dialog box as shown in
will be opened.
Capture on all interfaces
As Wireshark can capture on multiple interfaces it is possible to choose to
capture on all available interfaces.
Capture all packets in promiscuous mode
This checkbox allows you to specify that Wireshark should put all interfaces in
promiscuous mode when capturing.
Capture Filter
This field allows you to specify a capture filter for all interfaces that are
currently selected. Once a filter has been entered in this field, the newly
selected interfaces will inherit the filter. Capture filters are discussed in
more details in . It defaults to empty, or no
You can also click on the Capture Filter button and Wireshark will
bring up the Capture Filters dialog box and allow you to create and/or select a
filter. Please see
Compile selected BPFs
This button allows you to compile the capture filter into BPF code and pop up a
window showing you the resulting pseudo code. This can help in understanding the
working of the capture filter you created. The Compile Selected BPFs button
leads you to .
TipLinux power user tip
Manage Interfaces
The Manage Interfaces button opens the
where pipes can be defined, local interfaces scanned or hidden, or remote
interfaces added (Windows only).
4.5.2. Capture File(s) frameAn explanation about capture file usage can be found in .
This field allows you to specify the file name that will be used for the capture
file. This field is left blank by default. If the field is left blank, the
capture data will be stored in a temporary file. See
You can also click on the button to the right of this field to browse through
the filesystem.
Use multiple files
Instead of using a single file Wireshark will automatically switch to a new
one if a specific trigger condition is reached.
Use pcap-ng format
This checkbox allows you to specify that
Wireshark saves the captured packets in pcap-ng format. This next
generation capture file format is currently in development. If more than
one interface is chosen for capturing, this checkbox is set by default.
for more details on
Next file every n megabyte(s)
Multiple files only. Switch to the next file after the given number of
byte(s)/kilobyte(s)/megabyte(s)/gigabyte(s) have been captured.
Next file every n minute(s)
Multiple files only: Switch to the next file after the given number of
second(s)/minutes(s)/hours(s)/days(s) have elapsed.
Ring buffer with n files
Multiple files only: Form a ring buffer of the capture files with the given
number of files.
Stop capture after n file(s)
Multiple files only: Stop capturing after switching to the next file the given
number of times.
4.5.3. Stop Capture… frame
… after n packet(s)
Stop capturing after the given number of packets have been captured.
… after n megabytes(s)
Stop capturing after the given number of
byte(s)/kilobyte(s)/megabyte(s)/gigabyte(s) have been captured. This option is
greyed out if “Use multiple files” is selected.
… after n minute(s)
Stop capturing after the given number of second(s)/minutes(s)/hours(s)/days(s)
have elapsed.
4.5.4. Display Options frame
Update list of packets in real time
This option allows you to specify that Wireshark should update the packet list
pane in real time. If you do not specify this, Wireshark does not display any
packets until you stop the capture. When you check this, Wireshark captures in a
separate process and feeds the captures to the display process.
Automatic scrolling in live capture
This option allows you to specify that Wireshark should scroll the packet list
pane as new packets come in, so you are always looking at the last packet. If
you do not specify this Wireshark simply adds new packets onto the end of the
list but does not scroll the packet list pane. This option is greyed out if
“Update list of packets in real time” is disabled.
4.5.5. Name Resolution frame
Enable MAC name resolution
This option allows you to control whether or not Wireshark translates MAC
addresses into names. See .
Enable network name resolution
This option allows you to control whether or not Wireshark translates network
addresses into names. See .
Enable transport name resolution
This option allows you to control whether or not Wireshark translates transport
addresses into protocols. See .
4.5.6. ButtonsOnce you have set the values you desire and have selected the options you need,
simply click on Start to commence the capture or Cancel to
cancel the capture.React Native
ListView警告:in next release empty section headers ... - CSDN博客
React Native
ListView警告:in next release empty section headers ...
升级React Native到最新版本出现了一个Warning：
Warning:In next release empty section headers will be rendered.
In this release you can use 'enableEmptySections' flag to render empty section headers
这个错误出现在ListView中，在以后的版本中才会实现空的section
headers作为默认值，当前版本并没有支持。
如果我们不需要使用headers的话，可以禁止EmptySections。
解决方法：
& & & style={styles.listView}
& & & dataSource={this.state.dataSource}
& & & enableEmptySections={true}
本文已收录于以下专栏：
相关文章推荐
提示页面存在空数据，在listView中加个enableEmptySections属性即可
ReactNative提供了RefreshControl下拉刷新组件，但是没有提供上拉刷新组件，上拉刷新在App中是很常用的。
今天我们来实现一个iOS和Android通用的上拉刷新功能。
下面简要介...
当升级完react-native的版本时，run-android的时候会报警告in next release empty section headers will be rendered...
React Native自己实现的ListView还有一个隐藏功能那就是Section。Section在文档里连一句话都没有给足，但确确实实的是内置的。使用Section可以给数据分组，并且每一个Se...
react native最为人所诟病的一直是iOS
ListView没有办法进行缓存复用，不过最近同事找到了一篇好的文章，其中提供了一个根本的解决办法，我也在github上边下载了那个demo来做了...
最近在参照某些例子学习react-native 开发ios和Android的app时，碰到如标题所示的问题：
ListView的属性flexWrap为wrap不起作用。
如下可以看到每一行的其实是...
在安卓原生开发中，ListView是很常用的一个列表控件，那么React Native（RN）如何实现该功能呢，这里简单的讲解下。
ListView.js源码截图：
大致思路挺简单的：
1、展开效果可以通过Animated动画来实现，思路大致为，给Animated高度为0，当单击时Animated展开一定高度，这样就完成了展开的效果
2、ListView是...
概述在安卓原生开发中，ListView是很常用的一个列表控件，那么React Native（RN）如何实现该功能呢？我们来看一下ListView的源码ListView是基于ScrollView扩展得来...
概述ListView作为核心组件之一，主要用于高效地显示一个可以垂直滚动的变化的数据列表。经过自定义组装，我们还可以用它实现九宫格等页面效果。
在React Native中，使用ListView组件...
他的最新文章
讲师：董岩
您举报文章：
举报原因：
原文地址：
原因补充：
(最多只允许输入30个字)Access denied | linux.die.net used Cloudflare to restrict access
Please enable cookies.
What happened?
The owner of this website (linux.die.net) has banned your access based on your browser's signature (3c01d4e7ada06e44-ua98).【图文】2014年秋新版人教版九年级英语unit 4 Section A 2a-2c课件_百度文库
两大类热门资源免费畅读
续费一年阅读会员，立省24元！
2014年秋新版人教版九年级英语unit 4 Section A 2a-2c课件
大小：1.51MB
登录百度文库，专享文档复制特权，财富值每天免费拿！
你可能喜欢