当前位置： >
称： USB Multilink Universal freescale多合一仿真器
格： 面议/
最小起订量： 0
会员级别： 普通会员&第6年
提示：请优先选择
商铺网站：
关键词：，，，
发布日期： 7:48:50
Multilink Universal 多合一开发接口
从PC到Multilink的USB接口允许快速，方便的编程和调试--通过方便和兼容的USB接口。
USB供电 -无需单独的电源供应(目标烧写小于1mA)。
目标电压：1.6V的-5.25V
目标频率：16KHz-50MHz (适用于HCS08，RS08，CFV1，或HCS12X)
支持 HCS08，RS08，HCS12，HC12，ColdFire V1/+V1，ColdFire V2-4，Qorivva MPC55xx/56xx，以及 Kinetis ARM 微处理器系列。
自动频率检测+适应，用于HCS08设备。
自动频率检测，用于HC(S)12(X)设备。
对RS08设备在RESET line生成烧写电压
P&E&s USB Multilink Universal is an all-in-one development interface which allows a PC access to the Background Debug Mode (BDM) or JTAG interface on Freescale HCS08, HC(S)12(X), S12Z, RS08, ColdFire V1/+V1, ColdFire V2-4*, Qorivva 55xx/56xx, and Kinetis ARM microcontrollers. It connects between a USB port on a Windows machine and the standard debug connector on the target. The Freescale microcontrollers are supported via the multiple headers located on the USB Multilink Universal. The product photos to the left of this page show how the headers can be accessed by simply flipping open the plastic case. Ribbon cables suitable for a variety of architectures are included.
Supported Freescale Devices:
Qorivva MPC55xx/56xx
ColdFire +V1/ColdFire V1
ColdFire V2/3/4
Power Architecture PX Series
HC(S)12(X)
By using the USB Multilink Universal, the user can take advantage of the background debug mode to halt normal processor execution and use a PC to control the processor. The user can then directly control the target&s execution, read/write registers and memory values, debug code on the processor, and program internal or external FLASH memory devices.
The USB Multilink Universal works with P&E Microcomputer System's in-circuit debuggers and flash programmers to allow debug and flash programming of the target processor. For many of the supported processors, P&E has a set of interface libraries allowing the user to write their own Windows based application which interacts with P&E's debug interface. IAR, Codesourcery, Keil, and CodeWarrior software all support the use of P&E's USB Multilink Universal to develop and debug with Freescale's Kinetis ARM devices.
This interface is USB 2.0 compatible, and it is also backwards compatible with USB 1.1 ports.
NOTE: For a much faster all-in-one development interface which can also supply power to the target, please see the .
For production usage, see either the
stand alone programmer and debug interface, depending on which processor you are working with. See the
USB interface from PC to Multilink allows for fast, easy programming and debugging -- with the ease and compatibility of the USB interface.
Draws power from USB interface-- no separate power supply required (draws less than 1mA from the target).
Target Voltage: 1.6V-5.25V
Target Frequency: 16Khz-50Mhz (applies to HCS08,RS08,CFV1, S12Z, or HCS12X only)
Compatible with HCS08, RS08, HC(S)12(X), S12Z, ColdFire V1/+V1, ColdFire V2-4, Qorivva MPC55xx/56xx, and Kinetis ARM families of microcontrollers.
Includes USB cable, Type A Male to Type B Male, 6-ft.
Auto-frequency detection + trimming capabilities for HCS08 devices.
Auto-frequency detection for HC(S)12(X) devices.
Generates programming voltage on RESET line for RS08 devices.
One (1) USB 2.0 High Speed Cable, Type A to Type B, 6-ft.
One (1) 6-pin 0.100& pitch ribbon cable for connecting to RS08, HCS08, HC(S)12(X), S12Z, ColdFire V1/V1+ targets
One (1) 14-pin 0.100& pitch ribbon cable for connecting to Qorivva MPC55xx/56xx targets
One (1) 26-pin 0.100& pitch ribbon cable for connecting to asynchronous ColdFire V2/V3/V4 targets
One (1) 20-pin 0.100& pitch ribbon cable for connecting to Kinetis ARM targets
One (1) 20-pin 0.050& pitch ribbon cable for connecting to Kinetis ARM targets
当前位置： >
公司名称：
联系人：李进 先生 (联系时请说明是在中科商务网上看到的)
电话：<font color="#55- 　
手机： <font color="#
传真：<font color="#55-　
QQ： <font color="#519094
地址：深圳市福田区福明路雷圳大厦西半层503室（上海宾馆对面）
提供技术支持
免责声明：以上所展示的信息由企业自行提供，内容的真实性、准确性和合法性由发布企业负责， 对此不承担责任。您好，欢迎来到捷配电子市场网
您现在的位置： &
型号/规格：U-MULTILINK品牌/商标：pe
3000多家会员为您找货报价，SO EASY！
类型：生产企业
联系人：李进
地址：北京北京市深圳市福田区中航路都会轩1416
(32)N (1)N (26)N (2)N (3) (4) (1) (5) (2)
Multilink Universal 多合一开发
从PC到Multilink的USB接口允许快速，方便的编程和调试--通过方便和兼容的USB接口。
USB供电 -无需单独的供应(目标烧写小于1mA)。
目标电压：1.6V的-5.25V
目标频率：16KHz-50MHz (适用于HCS08，RS08，CFV1，或HCS12X)
支持 HCS08，RS08，HCS12，HC12，ColdFire V1/+V1，ColdFire V2-4，Qorivva MPC55xx/56xx，以及 Kinetis
自动频率检测+适应，用于HCS08设备。
自动频率检测，用于HC(S)12(X)设备。
对RS08设备在 line生成烧写电压
P&E’s USB Multilink Universal is an all-in-one development
which allows a PC access to the Background Debug Mode (BDM) or JTAG interface on
HCS08, HC(S)12(X), S12Z, RS08, ColdFire V1/+V1, ColdFire V2-4*, Qorivva 55xx/56xx, and Kinetis ARM microcontrollers. It connects between a USB
on a Windows machine and the standard debug connector on the target. The Freescale microcontrollers are supported via the multiple headers located on the USB Multilink Universal. The product photos to the left of this page show how the headers can be accessed by simply flipping open the plastic case. Ribbon cables suitable for a variety of architectures are included.
Supported Freescale Devices:
Qorivva MPC55xx/56xx
ColdFire +V1/ColdFire V1
ColdFire V2/3/4
Power Architecture PX Series
HC(S)12(X)
By using the USB Multilink Universal, the user can take advantage of the background debug mode to halt normal processor execution and use a PC to control the processor. The user can then directly control the target’s execution, read/write registers and memory values, debug code on the processor, and program internal or external FLASH memory devices.
The USB Multilink Universal works with P&E Microcomputer System's in-circuit debuggers and flash programmers to allow debug and flash programming of the target processor. For many of the supported processors, P&E has a set of interface libraries allowing the user to write their own Windows based application which interacts with P&E's debug interface. IAR, Codesourcery, Keil, and CodeWarrior software all support the use of P&E's USB Multilink Universal to develop and debug with Freescale's Kinetis ARM devices.
This interface is USB 2.0 compatible, and it is also backwards compatible with USB 1.1 ports.
NOTE: For a much faster all-in-one development interface which can also supply power to the target, please see the USB Multilink Universal FX.
For production usage, see either the Cyclone PRO or Cyclone MAX stand alone programmer and debug interface, depending on which processor you are working with. See the comparison chart below.
USB interface from PC to Multilink allows for fast, easy programming and debugging -- with the ease and compatibility of the USB interface.
Draws power from USB interface-- no separate power supply required (draws less than 1mA from the target).
Target Voltage: 1.6V-5.25V
Target Frequency: 16Khz-50Mhz (applies to HCS08,RS08,CFV1, S12Z, or HCS12X only)
Compatible with HCS08, RS08, HC(S)12(X), S12Z, ColdFire V1/+V1, ColdFire V2-4, Qorivva MPC55xx/56xx, and Kinetis ARM families of microcontrollers.
Includes USB cable, Type A Male to Type B Male, 6-ft.
Auto-frequency detection + trimming capabilities for HCS08 devices.
Auto-frequency detection for HC(S)12(X) devices.
Generates programming voltage on RESET line for RS08 devices.
One (1) USB 2.0 High Speed Cable, Type A to Type B, 6-ft.
One (1) 6-pin 0.100" pitch ribbon cable for connecting to RS08, HCS08, HC(S)12(X), S12Z, ColdFire V1/V1+ targets
One (1) 14-pin 0.100" pitch ribbon cable for connecting to Qorivva MPC55xx/56xx targets
One (1) 26-pin 0.100" pitch ribbon cable for connecting to asynchronous ColdFire V2/V3/V4 targets
One (1) 20-pin 0.100" pitch ribbon cable for connecting to Kinetis ARM targets
One (1) 20-pin 0.050" pitch ribbon cable for connecting to Kinetis ARM targets
类型：生产企业
联系人：李进
地址：北京北京市深圳市福田区中航路都会轩1416
你可能感兴趣的产品
电子元器件产品索引： &B&&&&F&&&&J&&&&N&&&&R&&&&V&&&&Z&&&&3&&&&7&&博客访问： 207732
博文数量： 72
博客积分： 2010
博客等级： 大尉
技术积分： 685
注册时间：
IT168企业级官微
微信号：IT168qiye
系统架构师大会
微信号：SACC2013
分类： C/C++
发现P&E Micro公司生产的PE Micro USB Multilink Interface在烧写HCS08单片机时经常卡住导致烧写失败，主要原因是驱动问题，解决的方法就是上PE官方网站下载最新的驱动程序和Firmware Update更新一下驱动程序即可。下载地址为：
注意：下载需要注册
阅读(2613) | 评论(1) | 转发(0) |
相关热门文章
给主人留下些什么吧！~~
我想问一下PE multilink的使用方法吗？我不知道该怎么下载程序.
请登录后评论。OverviewPE Multilink Universal is a software program developed by P&E Microcomputer Systems. The primary executable is named PEFirmwareUpdater.exe. The setup package is about 7.07 MB (7,411,858 bytes) when donwloaded. The installed file PEFirmwareUpdater.exe is the auto-update component of the program which is designed to check for software updates and notify and apply them when new versions are discovered. Relative to the overall usage of those who have this installed, most are running it on Windows XP. Most users that have installed this software come from the United States.
Program details
Help link: /support/index.cfm
Installation folder: C:\Program Files\PEMicro\Multilink_Universal\
Uninstaller: MsiExec.exe /I{D14D53EC--CEC259123}
(The Windows Installer is used for the installation, maintenance, and removal.)
Estimated size: 7.07 MB
Language: English (United States)
Files installed by PE Multilink Universal
Program executable:PEFirmwareUpdater.exe
Path:C:\Program Files\PEMicro\Multilink_Universal\PEFirmwareUpdater.exe
MD5:1c80f5b65b750c8ac3a42795ecdffbc1
Additional files:
peosbdmv1.dll (by Freescale) - OSBDM-JM60 Dynamic Link Library (OSBDM Dynamic Link Library)
PEFirmwareUpdater.exe
How do I remove PE Multilink Universal?
Quickly and completely remove PE Multilink Universal from your computer by downloading "Should I Remove It?", its 100% FREE and installs in seconds (click the button below).
Or, you can uninstall PE Multilink Universal from your computer by using the Add/Remove Program feature in the Window's Control Panel.
On the Start menu (for Windows 8, right-click the screen's bottom-left corner), click Control Panel, and then, under Programs, do one of the following:
Windows Vista/7/8: Click Uninstall a Program.
Windows XP: Click Add or Remove Programs.
When you find the program PE Multilink Universal, click it, and then do one of the following:
Windows Vista/7/8: Click Uninstall.
Windows XP: Click the Remove or Change/Remove tab (to the right of the program).
Follow the prompts. A progress bar shows you how long it will take to remove PE Multilink Universal.
USER ACTIONS
Uninstall it&7%
Keep it&93%
MOST USED OS
Windows XP
COUNTRY POPULARITY
United States
100.00% of installs come from the United States
Which countries install it?
&&United States
No one has commented yet. Help others learn more about this software, share your comments.
&|&&|&&|&&|&&|&&|&&