Pololu item #:
609 in stock
Price break
Unit price (US$)
Add to cart
Add to wish list
The GP2Y0A02 is the longest-range optical distance sensor we carry, featuring a detection range of 8″ to 60″ (20&cm to 150&cm).
The high maximum detection distance makes this sensor a viable alternative to sonar in some applications.
The distance is indicated by an analog voltage, making this sensor very easy to use.
&Description&&&&FAQs (0)&&Overview
3-pin JST PH-style cable connected to a Sharp analog distance sensor.
The Sharp distance sensors are a popular choice for many projects that require accurate distance measurements.
This IR sensor is more economical than sonar rangefinders, yet it provides much better performance than other IR alternatives.
Interfacing to most microcontrollers is straightforward: the single analog output can be connected to an analog-to-digital converter for taking distance measurements, or the output can be connected to a comparator for threshold detection.
The detection range of this version is approximately 20&cm to 150&cm (8″ to 60″).
The GP2Y0A02 uses a 3-pin JST PH connector that works with our 3-pin JST PH cables for Sharp distance sensors (not included); the top picture on the right shows a shorter-range Sharp analog distance sensor with one of these cables.
These cables have 3-pin JST connectors on one end and are available with , , and with
on the other end.
It is also possible to solder three wires to the sensor where the connector pins are mounted (see the lower picture to the right).
When looking at the back, the three connections from left to right are power, ground, and the output signal.
We also carry an assortment of
designed specifically for this sensor.
The pictures below show these brackets being used with a shorter-range version of this sensor, which has the same width and height but a shorter depth:
Family of brackets for Sharp GP2Y0A02, GP2Y0A21, and GP2Y0A41 Distance Sensors.
Feature summary
Operating voltage: 4.5&V to 5.5&V
Average current consumption: 33&mA (note: this sensor draws current in large, short bursts, and the manufacturer recommends putting a 10&uF capacitor or larger across power and ground close to the sensor to stabilize the power supply line)
Distance measuring range: 20&cm to 150&cm (8″ to 60″)
Output type: analog voltage
Output voltage differential over distance range: 2.05&V (typical)
Update period: 38&±&10&ms
Size: 44.5 mm × 18.9 mm × 21.6&mm (1.75″ × 0.75″ × 0.85″)
Weight: 5&g (0.18&oz)
Linearizing the output
The relationship between the sensor’s output voltage and the inverse of the measured distance is approximately linear over the sensor’s usable range.
(703k pdf) contains a plot of analog output voltage as a function of the inverse of distance to a reflective object.
You can use this plot to convert the sensor output voltage to an approximate distance by constructing a best-fit line that relates the inverse of the output voltage (V) to distance (cm).
Alternative Sharp distance sensors
We have a variety of Sharp distance sensors to choose from.
The closest alternative to this GP2Y0A02YK0F module is the newer
(10 &#&cm), which has the same maximum sensing distance but offers a lower minimum detection distance and more than twice the sampling rate in a much smaller package:
Sharp GP2Y0A02YK0F Sensor 20-150cm (left) next to Pololu Carrier with Sharp GP2Y0A60SZLF Sensor 10-150cm (right).
We also carry two shorter-range versions of this sensor: the
(4 – 30&cm) and the
(10 – 80&cm).
These two analog distance sensors have identical packages and pin-outs, making it easy to swap one version for another should your application requirements change, and they have the same mounting hole locations and cable connector as this GP2Y0A02YK0F.
For very short-range detection applications, we carry a .
We also carry three digital Sharp distance sensors that have low minimum detection distances and a high 400&Hz update rate.
They are available with a , , or
range and simply tell you if something is in their detection range, not how far away it is.
They are smaller than the analog Sharp distance sensors and draw less current.
A variety of Sharp distance sensors.
From left to right: GP2Y0A02, GP2Y0A21 or GP2Y0A41, GP2Y0A51, and GP2Y0D8xx.
The GP2Y0A02YK0F model is a lead-free, RoHS-compliant version of the Sharp GP2Y0A02 Distance Sensor.
The manufacturer recommends you insert a bypass capacitor of 10&uF or more between Vcc and GND near this sensor to stabilize your power supply line.
People often buy this product together with:
Related products
Related categories
Related Products
Related Categories